Jump to content
SAU Community

4.375 Diff Ratio In Gtr

pnblight
 Share

Recommended Posts

pnblight Mentor

pnblight

Posted
Posted

Hi Guys,

Just completed my diff ratio swoop in the gtr from 4.11 to 4.375(gts4) and i was wounder if anyone knew how to alter the speedometer to read correctly. As i believe it should be out now yes? Any help would be much appreciated.

pete

ps did search with no luck

Link to comment
https://www.sau.com.au/forums/topic/102126-4375-diff-ratio-in-gtr/
Share on other sites
SteveL Mentor

SteveL

Posted
Posted
Hi Guys,

            Just completed my diff ratio swoop in the gtr from 4.11 to 4.375(gts4) and i was wounder if anyone knew how to alter the speedometer to read correctly. As i believe it should be out now yes? Any help would be much appreciated.

It will be out, but changing the speedo drive pinion at the gearbox will fix that. Someone might have a secondhand one from a GTS4 gearbox, but the part number for a new one from Nissan is:

32703-05U21

blind_elk Grand Master

blind_elk

Posted
Posted

Look up the businesses under "speedometers" in the Yellow Pages. Apparently they can re-calibrate the speedo with a "black-box" converter / adjuster.

Steve, what's the P/N for the Stagea's drive pinion?

funkymonkey Grand Master

funkymonkey

Posted
Posted

no need to recalibrate if you change the speedo pinion.

here is the R32 GTR one:

post-256-1137459490.jpg

post-256-1137459529.jpg

here is the R32 GTS4 one:

post-256-1137459557.jpg

the difference is 20 notches on the GTR one and 21 on the GTS4 one, it should swap straight in. The difference in speed you'll see on the speedo is roughly 0.3%.

The part number of the GTR pinion is 32703-05U20. THe GTS4 one is 32703-05U21. Just ring up nissan and grab it from them, it should be about $50.

blind_elk Grand Master

blind_elk

Posted
Posted
...The difference in speed you'll see on the speedo is roughly 0.3%.

The difference is more like 5% (21 is 1 more than 20, ie 20 + 1/20 * 20, and 1/20 = 5%). Fortunately, the speedo will now read higher than reality, so far less likely to get photographed.

The error in mine, having gone from a GTS4 to a Stagea (4.083) diff, is roughly 7%. But mine reads under the real speed - caution, Will Robinson!

sky30 Mentor

sky30

Posted
Posted
no need to recalibrate if you change the speedo pinion.

here is the R32 GTR one:

post-256-1137459490.jpg

post-256-1137459529.jpg

the difference is 20 notches on the GTR one and 21 on the GTS4 one, it should swap straight in. The difference in speed you'll see on the speedo is roughly 0.3%.

The part number of the GTR pinion is 32703-05U20. THe GTS4 one is 32703-05U21. Just ring up nissan and grab it from them, it should be about $50.

Are you sure the one on picture 2 is a GTR one, cause when i ordered a GTR pinion drive i got a RED gear, and the teeth are angled back the opposite way to my GTS4 gear. I tried to fit the RED GTR gear it in my GTS4 box but it wouldnt go in.

Are there 2 different GTR gears?

SteveL Mentor

SteveL

Posted
Posted
Are you sure the one on picture 2 is a GTR one, cause when i ordered a GTR pinion drive i got a RED gear, and the teeth are angled back the opposite way to my GTS4 gear. I tried to fit the RED GTR gear it in my GTS4 box but it wouldnt go in.

Are there 2 different GTR gears?

Hmmm, interesting.....according to FAST the gear in the ATESSA housing that drives the pinion shown in those photo's has the same part number for both GTR and GTS4 - it is identical in each case, so the pinion gear teeth form should also be the same.

funkymonkey Grand Master

funkymonkey

Posted
Posted

Speedo Pionion assembly for the Stagea is:

32702-5P519 for the Aug 1998 and newer (auto and manual)

32743-0V120 for Sept 1996 to Aug 1997 (auto only)

32743-0V120 for Aug 1997 to Aug 1998 (auto only)... slightly different transfer assembly, but pinion is the same.

sky30 Mentor

sky30

Posted
Posted
Hmmm, interesting.....according to FAST the gear in the ATESSA housing that drives the pinion shown in those photo's has the same part number for both GTR and GTS4 - it is identical in each case, so the pinion gear teeth form should also be the same.

Dont know why the one i have has the teeth angled the opposite way, i have a VLturbo(MX7) drive gear hear also the teeth are angled the same way as the RED GTR gear i have....

The RED spedo gear i have works fine in my R33 turbo box, but wont go in the GTS4 box.

Will try and get some pics up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      Torana Lx Gtr Hatch, Lots Of Pictures

      By The Bogan · Posted

      LOL, when one "money pit" is never enough Noice, and excellent work mate
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...