Jump to content
SAU Community

Recommended Posts

  • Replies 160
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

tom_g how much do you want for them :)

They aren't for sale. I will be putting them on my car i'm just waiting until i do the rest of the suspension, which could take a month or 2, so if Roy wants to borrow them for Calder i don't mind. :(

They're for R32 as well so probably no good for you.

You can have mine if you want. I just picked up some new whiteline swaybars today but  i probably won't put them on for a while, so they'll just be sitting here in the boxes.

I won't be driving at Calder, but i'll come and watch.

Thanks for the offer, but i get back on Saturday morning at about 7am. So it would be a busy day to change the fluids, slave cylinder, put seat in the car and make it to Calder by 4pm. Having to put swaybars on would only make life that more difficult....so bugger i am goign to have ot miss another day.... :P

I spoke to Tony this afternoon. He said entry lists up shortly. There are less than 30 entries at the moment which is why none have been posted up.

Sup req's should finally be up tonight so the entries should start to come in now.

I will be using semi’s but this will probably be the only time this year, the rears have about 1mm of tread left on the rears :) But it doesn’t matter I am slower than the guys with street rubber anyway :)

Hey - anyone who hasnt been to Calder before and wants to see some in-car footage here's a good one of a 911 Carrera Sport 3.2

Lap of Calder - Its pretty big at 7.3MB as a warning.

But it gives you a good feel for the bumps at the end of the straight, the hill and the flip flop.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...