Jump to content
SAU Community

Recommended Posts

I am interested to know roughly what 1/4 mile i would get out of my r33 with the following mods.

Garret T04E

40mm External Gate (with screamer) @ 18psi

ARC Intercooler

3" mandrel bend exhaust

walbro 500hp fuel pump

H/D clutch

K&N filter

nismo 550cc injectors

Z32 AFM

Power FC

I am having the injectors, FC & AFM installed next week, i pulled 214.4RWKW without those 3 items however ran stupidly lean, be interesting to see what i pull next week.

Just out of curiosity (knowing that there are variables involved) what other people have timed with approximately 250rwkw.

Edited by WNA-FLY
take it to the drags

what he said.... there are to many variables and none of us except maybe sydney kid :( are human dynos .... you will never no unless you take it down the strip yourself.

Edited by fEkuaR
Fair enough, was just wondering what people have been getting with around 250rwkw at the strip. will post results end of next week.

hard even with a power figure.

Who knows

1) how laggy/responsive the turbo is

2) the tyres/state of the track and stuff.

3) one of the better ones - the driver :(

Lots of other variables, best to hit the track and work from there as to how close or better you might be able to get

hard even with a power figure.

Who knows

1) how laggy/responsive the turbo is

2) the tyres/state of the track and stuff.

3) one of the better ones - the driver  :(

Lots of other variables, best to hit the track and work from there as to how close or better you might be able to get

fair enough guys. just curiosity and boredom got me writin up this thread.

will take all advice and put it on the track.

Dave.

Will have to be after its tuned next week.

sorry for this thread, seems like I'll have to just find out for myself,

lol just wanted to see if all my money is gettin me anywhere..

Edited by WNA-FLY
we like to joke...

after its tuned next week.

sorry for posting this thread, seems to have caused much wasted time for all parties.

i was being serious :D

I wanna know what your results are gonna be dude B)

Hardly wasted anyones time, was a easy question to answer, hardly done harm :O

i was being serious :(

I wanna know what your results are gonna be dude   B)

Hardly wasted anyones time, was a easy question to answer, hardly done harm  :)

LOL haha, too easy to mis interpret peoples comments on a computer (sorry for that) ;)

ProTek will be on the job next week and will then take it down to Calder on one of its friday night's. will keep posted.

Would like to see if my money is well spent. Knowing my luck I'll take it to the strip and fry a piston. hehe :lol:

Edited by WNA-FLY

216rwkw and I am only getting 13.4 at wsid bad wheel spin in first (not even dumping it the locker helped a bit) and 171 kph so nice top speed

265's 18's on the rear and olims suspesion so not really set up for drag stip.

so if its going to be a drag car, you might think about some suspension mods.

Edited by race_snooze

Without taking everthing into consideration ie. 1) how laggy/responsive the turbo is

2) the tyres/state of the track and stuff.

3) one of the better ones - the driver

Can't anyone with the same (estimated) power figures as WNA-FLY give him a rough estimate of what kind of 1/4 mile time he should be expecting... (ROUGHLY).

P.S I will be going to go down to calder next friday night might see you there.. :(

Without taking everthing into consideration ie.  1) how laggy/responsive the turbo is

                                                                    2) the tyres/state of the track and stuff.

                                                                    3) one of the better ones - the driver

Can't anyone with the same (estimated) power figures as WNA-FLY give him a rough estimate of what kind of 1/4 mile time he should be expecting... (ROUGHLY).

P.S I will be going to go down to calder next friday night might see you there.. :D

Yeah tyres are gonna be my biggest issue with loss of time (plus the fact it'll be my first time on the strip) can anyone reccomend a grippy set of tyres.?

Im running 17X9" Volks on the rears if that makes it easier for a suggestion.

thanks

Yeah tyres are gonna be my biggest issue with loss of time (plus the fact it'll be my first time on the strip) can anyone reccomend a grippy set of tyres.?

Im running 17X9" Volks on the rears if that makes it easier for a suggestion.

thanks

Buy a cheap set of 16s and get MT drag radials!!! then you could expect somthing under the 12.5 mark with some practice!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
×
×
  • Create New...