Jump to content
SAU Community

Car Falling Apart.

vange

By vange,
in South Australia

 Share

Recommended Posts

vange Experienced

vange

Posted
Posted

Was driving 2 my mates house late last nite with few friends, in several cars, i was alongside my mate in his HSV GTO. we got to draffic lights (after driving for 10 min along marion rd) and as the ligths go green, i start driving, n i look behind me n he isnt moving.

he calls me n goes my car wont move. i go back to have a look, start the engine runns ok, put it in drive n hear grinding noise comming from the back..i go, have a look under the car incase somthings jammed underneath...we have a look and wat do we see...3 brackets with 5cm long thick bolts on the ground under the car...

came from the diff, raa came, n said thers no awy they could have just fallen off, had 2 b unscrewed, and would have taken a while cos its awkward position/large bolts...some parts to the diff came off and there was 2 more missing there we couldnt find...sounded like the bearings were fked....got towed to HSV to get repaird...lucky its under warranty...lol well theres my excitment for the night...

Link to comment
https://www.sau.com.au/forums/topic/103924-car-falling-apart/
Share on other sites
Bl4cK32 Grand Master

Bl4cK32

Posted
Posted (edited)

Dude i used to work on new stuff that holdens built, and the v8 irs were all the same. Ive seen some poor excuse for quality come through, and i complained about it.

Know what response i was given?...-"Don't worry about it, because holdens are happy with it"

Chassis are basically all the same from base to HSV GTO models.

Edited by Bl4cK32
Drift Spec Community Regular

Drift Spec

Posted
Posted
my oldman has a gto monaro and had no probs with it...

maybe i should climb undernethe it and check  some mountings out

And they wonder why people buy imported cars :S

My old man's VX S Commodore has only done about 60k and is always garaged... yet all the rubbers on the rear window have already shrunk and gone out of shape

My Supra turns 20 years old this year.... all the rubbers are the original ones, and are still in awesome condition.

Cubes Grand Master

Cubes

Posted
Posted

My old Commo's rear IRS subframe cracked all the way through, the crack looked like it began from where the diff bolts up on the drivers side. Obviously gear slapping related. :P

Cost 2k to fix... My rear wheels had what looked like 45degree's negative camber with the bumper touching the ground. :S

Then the diff went... and the gearbox.. :S

Simply looking at the design you can see how the skylines are so much stronger. Not that this is a comparo thread, just an observation from an ex-commode owner.

Sounds like the center bearing mount has dropped?? I doubt the gearbox rear mount has let go.

ax53b70p25 Experienced

ax53b70p25

Posted
Posted

ha ha ha ha ahahahahahaaaaaahaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

aaaaaaaaaaaaaa farkin ha what do you expect from a car that comes from elizabeth made by beer swilling, dope smoking, meth taking, ferals ha no shit it fell apart , sorry laughed my ass off that hard am still hurting from it.

Bl4cK32 Grand Master

Bl4cK32

Posted
Posted

I dont have any problems with holden cars. All of the ones made before 1979 are the best running, most reliable cars i have owned.

There are quality holdens, built but like anywhere else, there was quality issues that you wouldnt want on a car you would buy.

Have a look how many Holdens there are in the workers carpark to see what i mean :)

SRLS1 Rookie

SRLS1

Posted
Posted
ha ha ha ha ahahahahahaaaaaahaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

aaaaaaaaaaaaaa farkin ha what do you expect from a car that comes from elizabeth made by beer swilling, dope smoking, meth taking, ferals ha no shit it fell apart , sorry laughed my ass off that hard am still hurting from it.

... the same as a car built by "beer swilling, dope smoking, meth taking, ferals" in the industrial districts of japan.. There isnt some brilliant samurai sword builder that personally builds each skyline you know... they have their line workers too. I guess holdens are just built to a price, and thats about it.

That's my biggest reservation about "performance" commodores is that their price tag isn't reflected in a better overall build quality...

HR-32 Community Regular

HR-32

Posted
Posted
ha ha ha ha ahahahahahaaaaaahaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

aaaaaaaaaaaaaa farkin ha what do you expect from a car that comes from elizabeth made by beer swilling, dope smoking, meth taking, ferals ha no shit it fell apart , sorry laughed my ass off that hard am still hurting from it.

lol :lol: :lol: :lol: :lol: :lol:

S3_Girl Enthusiast

S3_Girl

Posted
Posted
true, had 1 keep up with me 2day, but i had my air con on..

There would be hundreds and hundreds of vlt's that would beat you

Knowing lots of people at holdens and knowing there second job's are meth dealing

and dope growing, i somehow still don't see Japanese industrial workers being that bad

cheers

darren

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...