Jump to content
SAU Community

Recommended Posts

Yep i agree with the above, did wonders for my car once it got off the boat... they have a full cut polish and also a middle-of-the -road one which isn't quite so abrasive, i think it's called a "cleaner" or something to remove dirt/grime and oxidised paint. crystal finish somethingorother. ah heck you'll find it!

Link to comment
https://www.sau.com.au/forums/topic/10417-cut-polish/#findComment-166927
Share on other sites

I think its Eagle one hmmmm trying to think but they do the wet shine tyres and their polish brings my car up like glass - ive also got maguires wet shine but it smudges for me - then again some days i just cant be bothered putting any effort in - its like im only doing this because my car looks gun metal grey when it really should be black. All i can say is what you pay for is what u get and if u can grab hold of armoural wipes for the inside of your car - do so! They are like baby wipes but you go over you vinyl/leather dash and steering wheel etc with them and they really do a good job specially if you car is sitting in sun all day.

Link to comment
https://www.sau.com.au/forums/topic/10417-cut-polish/#findComment-167548
Share on other sites

Guest KILLER-T

If you have a black car dont even think of cutting the paint work back yourself unless you know what you are doing because it will just end up looking crap full of swirl marks in the sunlight best to let the pros do it but you could try meguiar's scratch-x it works good on black paint and then try some meguiar's gold class wax:uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/10417-cut-polish/#findComment-167757
Share on other sites

I tried the turtle wax, with the chip stick... The wax itself is colour coded (just get the same shade as your car, e.g. red, blue etc).

It did cover up a 2" scratch on my boot lid and looks less obvious unless you come very close. I may do it again to get another layer for better protection.

Always a good idea to do it once every few months I suppose, but of course not every week.

Link to comment
https://www.sau.com.au/forums/topic/10417-cut-polish/#findComment-168229
Share on other sites

"and if u can grab hold of armoural wipes for the inside of your car - do so! They are like baby wipes but you go over you vinyl/leather dash and steering wheel etc with them and they really do a good job specially if you car is sitting in sun all day."

In my opinion Armourall is rubbish - ie too greasy/slimy, you can always tell if someone has used it. The Meguiars plastic cleaner is better, lasts longer, looks more 'natural' and you wont slide right out of your car.....

Link to comment
https://www.sau.com.au/forums/topic/10417-cut-polish/#findComment-168566
Share on other sites

Originally posted by SupaFly Skyline

meguiars all the way

Yepp, that's what I use.

The last time I polished the car was about 12 months ago, and it still looks great after a wash.

Hay one thing - has anyone used one of those electric buffer things that you can buy for $40-50 bucks???

Are they any good??

It would make the job sooooo much quicker.

J

Link to comment
https://www.sau.com.au/forums/topic/10417-cut-polish/#findComment-168569
Share on other sites

U know how i said those wipes were amoural they are actually maguires gold class - my mistake why the hell i thought they were amoural is beyond me - they do a good job of the inside anyway!

Link to comment
https://www.sau.com.au/forums/topic/10417-cut-polish/#findComment-173322
Share on other sites

i got one of them buffers the other day lol... i'm gonna use it on my black car tommz, I'll let youse know how it goes...

It was on sale in Marlows from $60 to $20 (with a discount coz my mate owrked there).

I now have to find gold class hard wax by maguiars. I use the liquid one and it works wonders but liquid wax tends to fly off the buffer.

Link to comment
https://www.sau.com.au/forums/topic/10417-cut-polish/#findComment-173833
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...