Jump to content
SAU Community

Recommended Posts

Hey guys, for all the power hungry ppl out there, i was wondering how it feels to have skylines that pull above the 700-800nm torque range???, after all it is seat of pants that is the human torqueometer isnt it lol!!!Ive only midly modded my 25t and i still feel the need for more power, but does it ever get unnerving when you get to such high power outputs???, or is it always the same........still feel the need for more hahah

just a general chat question lol bored!

Link to comment
https://www.sau.com.au/forums/topic/105178-powerwhen-do-you-think-its-enough/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

good post

im about 200rwkw, and its probably too much for just a street car

just a quick blip and you are pretty much over the speed limit

theres not many roads around where u can enjoy the power without exceeding the speed limit

id love to make more power if i hit the track, but as my line is our daily driver and it needs to be on the road, it probably will never happen

i wont be powering her up anymore i dont think

Its like money nsta, when ur poor u say if i had 10 million dollars i would give half of it to all my mates and i would never work again. However the more u have the more u want, more and more and more... Its like a game, a sick game, a sick addiction, it becomes an obsession until it devours you... or until u wrap urself around a pole (God forbid)

250rwkw i reckon would be enough for me btw.

Edited by Taso84

hahahah, i so know the feeling, ive got a 25t and am still wondering what the limits are with these cars before traction becomes an issue lol, im at around 180rwkw with basic mods and it seems to hold my 265 rubber atm.

Umm, how much torque do you guys produce at around 250-300rwkw?

Got 230rwkw.Good tyres suspension and driving will usually be the limiting factor.400rwkw in the wrong hands will definately be the limit.200rwkw with a highly skilled driver would do more.Some track days and quality tyres and brake pads and 250rwkw should be just about perfect. :P

i would say depends on choice of racing, street, track or drags. circuits & street i think you can definately have too much power.

drags i reckon you can never have to much power!

circuit i reckon depends on skill and track but for me high 300 kw's @ 4wheels :P is more than enough and other factors start playing an important part eg brakes and handling just to keep it pointing in the right direction.

street i would reckon no more than 300 for safety sake

cheers russ

For my street car, when I can't put it down in the dry with a decent set of streetable tyres, then I'll have too much power.

If I were to build a track car, when I can't put the power down in the dry with a set of full slicks then I'll have too much power.

Right now, I'm going to guesstimate 300rwkW will be about the maximum I'd want in my street car. Especially if I can shift my power curve higher up in the rev range. Otherwise, I'd be happy with around 250rwkW. I should still be able to floor it out of 3rd gear corners without wheelspinning at that level.

Edited by scathing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
×
×
  • Create New...