Jump to content
SAU Community

Recommended Posts

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

The more you modify it the less you will drive it.

My 33 hardly sees the road anymore as driving it to work is the city is a pain in the ass and then theres the bacon to also worry about everytime you take it out. Thats y i got myself a second car as a daily driver. My daily driver only has around 190kw@engine and is plently driving around most times

On the street I find 240 rwkw as much as I would want. Ive had more powerful dailys and they are not practical.

I dont drive mine daily, im in the company car mostly, so its good fun getting into the more powerful car.

240rwkw is good but not enough. 1st and 2nd are hell fun, don't need more power there but I'd like to be able to snap it into third with more than just a chirp.

Until it becomes impratical, you'll always be wanting more once you become acustomed to what you have. I think I'll hit the limits of my stock internals then stop. So cams and injectors should finish it nicely and hopefully get me to 260-270rwkw.

Just got the money from my new loan to buy me a daily though. Getting a Suzuki Sierra. 1.3l carb! Driving the Skyline less will make me appreciate it more :P

Power figures by themselves don't mean too much - especially on the street. More importantly is where does it come on. I know of a number of high (and I mean big) horsepower cars that can't use any of it until after 5000-6000rpm. They would be eaten down low by a high torque car which comes on early.

Mind you - once they wind up on a longer stretch its bye-bye, but generally thats not where most of us drive.

mines making around 300rwkw's and its not enough but im making 1500+ NM's oif tractive effort on the dyno wheel spinning.... needless to say its pretty silly on the street but more is never enough...

Needless to say its back into RD and were doing some more things too hopefully push up and over the 400kw mark and thats where i shall sit for a while. Next will be a tube frame car, fiber glass body to exactly replicate the current car, same engine but with a PSI blower hanging out the bonnet. Will more then likely commence mid-end of next year.

lol, i didnt know you can power down at 300rwkw and stil have traction, is this with some sort of lsd'd or what?, even at 180rwkw i feel there is a bit of issues with my tyres trying to grip whilst building boost!

that means your tyres need replacing.

i ran 330rwkw and had little traction issues using street 225's.

skated a tad @ the top end of each gear. Otherwise in my book it was nothing.

I've seen poorly setup stock R33's get more wheelspin.

all in suspension and tyres.

As for your question about torque... i doubt many here have had thier motor on an engine dyno to be able to accurately answer that.

Dynos are a tuning tool... worse if you try using the torque figures

Sounds like someone has been playing way too much nfs most wanted.

I may have 300awkw at the moment, but it blows, because the sort of driving i do requires me to have decent power down low. I think I would be happier with around the 250-270awkw with much better response

maybe we should swap?? lol i've got just over 250 at the wheel and full boost at around 3700. i love giving it some in rwd as it just smokes em up as it hits boost. that's with semi slicks.... hate to see what it would be like with shit tyres.

i think 250kw in a rwd skyline is enough for street. in a GTR i think 310 or so is about right.

if we are talking track make that 280 for the rwd sky, and 380 for the GTR. :(

hehe ill see how 250rwkw feels and responds and then go from there, hell im happy with 200rwkw atm once tuned.......

whats the best way to get r33's to stop spinning up when you have more power (ie 250+rwkw)?, i think i do have Sh*& tyres to tell ya the truth!

Tyres make a huge difference, I usually run 265s, and from compound to compound, it makes a big difference. With yoko AVS, I find 3rd gear easy to fry after clutching it, but I have since bought some new SO3 bridgestones, and they grip like HELL!!

As someone mentioned earlier, power figures mean little, theres so many variables, unless your clearing 280 rwkw :(

Personally I think Its useless getting heaps of power if ur gonna drive it on the street. Not only does it become dangerous, but you will get caught. Not to mention the legalities. In melbourne here Im not bothering going all out on mods, even though its relatively inexpensive to do so- police just hammer you. If your gonna use it for track go for it -.

A mate of mine spent about 8K modding his R33 about 4 months ago, made over 300 rwkw. Got done with yellow and EPA and is now struggling to sell his setup for insanely cheap prices. You start to wonder whether its worth it or not.

Any other state (dont know about NSW) I wud have defenitely modified my car much more!

380aw or rwkw for the gtr would make it pretty unstreetable. How many guys do you know making that sort of power have decent reponse ?

With what I have, it sucks. I'll be going gt-ss on the next car, just for something a bit different :(

i said 310 for a street car. 380 for a track car....

As said before - depends on the use for your car, and includes suspension setup and driveability

Ive got a GTR with 235rwkw, and really enjoy taking it out, but almost everytime i drive it, i think about what to do next.

So for me? TO4Z and 420 awkw will be enough.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...