Jump to content
SAU Community

Recommended Posts

your best options would be the pfc, dont waste you time with anything else!!!!!!!!

steve

Cost would be a factor.

AP engineering Power FC ( required for an RB20 ) would be around $1300-$1400 plus tuning of $450 ish.

Remap including supplying the necessary board hardware is around $880 all up including tune.

Any retuning is based on an hourly rate same as tuning any computer and both Lucas's Bikiroms and Glenn's Lumpyroms have had considerable success in high power applications .

Lee Sampsons 470 rwhp SR20 DET and 11.18 1/4 mile on a Lumpy rom is testament to that.

Or Adam Trewhellas RB25 Cefiro with 365 rwhp and stays on the rev limiter for most of the Wanners drift track.

Only down side is in WA you are limited to the 2 shops above as Denver mentioned so if you hate us both , your in trouble for retunes :P

Cheers

Ken

spoke to hyperdrive about it.... sounds pretty good. only downside i guess is cost of reprogramming when upgrading components.

didnt really want to spend 2k on pfc .

does 300hp@ wheels sound a bit far fetched? (already have gt2530 and gtr injectors)

spoke to hyperdrive about it.... sounds pretty good. only downside i guess is cost of reprogramming when upgrading components.

didnt really want to spend 2k on pfc .

does 300hp@ wheels sound a bit far fetched? (already have gt2530 and gtr injectors)

Cost of retuning is no different than any other computer. Rate is $140ph on the dyno and takes about the same time as tuning an Autronic/motec/wolf/power FC.

300rwhp is achievable , I have 290rwhp in an RB20 with low mount and external gate.

( Well I did till the turbo blew on Saturday night :) )

Cheers

Ken

One of our custom made hiflo ones using a stock R33 GTS-T turbo.

No mods to be needed and dump bolts straight up. $1600 which sounds expensive except every other turbo avaliable requires dump/intake or water line changes.

We weld the gate up and run external gate mounted on a stock manifold.

Relatively cheap but a little laggy atm until we sort of few other things out.

And yes , it is on stock internals and running 16-17psi.

Cheers

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
×
×
  • Create New...