Jump to content
SAU Community

Recommended Posts

I'd like to think the R33 GTST does it in 6 secs though I think 7 is more like it (based on experience in other cars where reliable times are available). I know import magazine did it in 6.2 or 6.3 though I don't know how reliable their figures are.

Motor magazine time the R33 GTR at 5.65 to 100. They had a passenger and a full tank of fuel. They thought that it could be reduced by another half second if they were close to empty.

Edited by Smurf
I'd like to think the R33 GTST does it in 6 secs though I think 7 is more like it (based on experience in other cars where reliable times are available).  I know import magazine did it in 6.2 or 6.3 though I don't know how reliable their figures are.

Motor magazine time the R33 GTR  at 5.65 to 100.  They had a passenger and a full tank of fuel.  They thought that it could be reduced by another half second if they were close to empty.

0-100km/h quoted times depend on so many factors, which is why I only gave ballpark figures. Quoting the times from one magazine means SFA - there is no guarentee that on that day in those conditions they acheived the best the car is capable of.

Also, a seat of the pants experience is not quantifiably comparable, as so much of how quick a car feels depends on the power delivery and torque curve, rather than peak power and outright acceleration. A car with a very flat torque curve from idle to redline might feel slower than an equally quick turbo car with a huge mid range surge of torque that pins you into your seat.

For your Motor reference, remember that a few years back at PCOTY Motor clocked the Bentley Contineltal GT at over 6 seconds for 0-100km/h. Does this mean that this is the best the AWD 411kw Bentley is capable of? No.

So I stand by my previous ballpark figures.

0-100km/h quoted times depend on so many factors, which is why I only gave ballpark figures.  Quoting the times from one magazine means SFA - there is no guarentee that on that day in those conditions they acheived the best the car is capable of. 

Also, a seat of the pants experience is not quantifiably comparable, as so much of how quick a car feels depends on the power delivery and torque curve, rather than peak power and outright acceleration.  A car with a very flat torque curve from idle to redline might feel slower than an equally quick turbo car with a huge mid range surge of torque that pins you into your seat. 

For your Motor reference, remember that a few years back at PCOTY Motor clocked the Bentley Contineltal GT at over 6 seconds for 0-100km/h.  Does this mean that this is the best the AWD 411kw Bentley is capable of?  No.

So I stand by my previous ballpark figures.

I agree that quoting one magazines time is no indication of what the car can necessarily do though it is what it did do on that day. So it is capable of what I have quoted. I have never seen any other reliable source provide a figure.

You are right in that a seat of the pants feel is not necessarily accurate. The cars that I compare it to have flatter torque curves than the Skyline and feel very similar in speed. Given that these cars in numerous other tests do it in around 6.8 seconds and using what you have said above, this would indicate that these cars are slightly faster than the GTS25T.

Don't get me wrong, I would like to think the GTS25T can do it in around 6secs (as I own one), I just don't think they can. Maybe I just own a slow one or I can't drive.

im guessing that the figures mentioned for the gtr are with dumping the clutch at 7K rpm. I think if you had to be nice to the car the r33 gtr would be in the low 6s when stock. This is also what autospeed found. The gts25t would be easily in the 7s (its not a quick car when stock).

well paul has done 0-100km/h in 4.88 seconds with maybe 180-190rwkw in a 33 GTS-t...so id say a GTR with more power and 4wd can beat that

Didnt really answer his question the key word here was stock. There are so many factors involded in times and remember when they are tested they use professional drivers and the give the car its all.

im guessing that the figures mentioned for the gtr are with dumping the clutch at 7K rpm. I think if you had to be nice to the car the r33 gtr would be in the low 6s when stock. This is also what autospeed found. The gts25t would be easily in the 7s (its not a quick car when stock).

5 flat with a 7k clutch dump, maybe even just under with a decent clutch and sticky tyres.

gtst probably under 7 but not by much

I easily managed to do 0-100 in 6.5sec in my totally stock standard '98 R33 GTS25t (other than wheels/springs)....I didn't do a tyre/clutch frying launch either.

This was measured with a Greddy turbo timer in 0-100km/h attack mode (it's hooked up to ecu speed sensor).

So I definitely believe they're capable of low 6's in standard trim...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...