Jump to content
SAU Community

Recommended Posts

Can I make a suggestion.

to prevent further piss taking, by others, on you....

you don't post on here about your dyno queen until you run in the low 11's or a 10 at some mph that you think you can.

you're just making a fool of yourself.. talking yourself up.. LNEMUP bro.. and so forth..

then making excuses about diffs and radiator caps.

sorry to sound harsh but you had it comming.

SK predicted a 12.5 at 120mph and you arc'd up and said

Listen buddy

if your so confident in your car

LNEMUP

Any time

Wheres your so called RB31 In a dream or what

just like a little kid who's just been told his toys aren't as good as he thinks they are...

and what happened?

you didn't even get the time he predicted.

then ADRIAN just posted he drove a car with 285rwkw (probably with stock diffs and radiator cap on) and got a much better time and a higher terminal speed.

props to you for getting such numbers from an internally stock rb25.. I've got no issues there, but your attitude just pisses me off.

LNEMUP.... for f**ks sake..

was 2SIK4U2C2BME4U taken?

attitude adjustment needed in isle 5.

Can I make a suggestion.

to prevent further piss taking, by others, on you....

you don't post on here about your dyno queen until you run in the low 11's or a 10 at some mph that you think you can.

you're just making a fool of yourself.. talking yourself up.. LNEMUP bro.. and so forth..

then making excuses about diffs and radiator caps.

sorry to sound harsh but you had it comming.

SK predicted a 12.5 at 120mph and you arc'd up and said

just like a little kid who's just been told his toys aren't as good as he thinks they are...

and what happened?

you didn't even get the time he predicted.

then ADRIAN just posted he drove a car with 285rwkw (probably with stock diffs and radiator cap on) and got a much better time and a higher terminal speed.

props to you for getting such numbers from an internally stock rb25.. I've got no issues there, but your attitude just pisses me off.

LNEMUP.... for f**ks sake..

was 2SIK4U2C2BME4U taken?

attitude adjustment needed in isle 5.

:O it's funny, because it's true.

Yeah, i suggest you get your dyno calibrated or something, coz with 500rwhp which is around 370rwkw you should have a much higher speed than 118MPH......... Also i find it hard to beleive a GT35/40 can make 370rwkw on 18psi, your MPH indicates it doesnt, so maybe fix your dyno.

Im not going to buy into that argument, but in watching the runs I think its fair to say that

on this occasion it might have been more driver inexperience rather than the car. the car sounds

really snappy, im sure it will go fast, I think you should run it a few more times before you start making drastic changes as you really dont have any data to go off as you really didnt do a clean pass.

dont stress, ive had customers that have had 10+ runs in a day before they got it all right.

Be patient, it will happen.

At MR GTST

Wheres your piece of shit

lets see you race

first time out in this car

at like i said i was only crossing the line in third gear

you wanna argue ill meet you somewhere and be happy to argue wit you there you said case

adrian drove the car first and second passes doing 13s and 12s running 114 and 117 or so MPH

then he got a third pass and ran 11s at 125 so like i said

when i run the number ill post it back on here so you can wank over it and type somemore shit and jealous comments about it

you dickhead

Edited by MR331307

bahahahahaha...

1.) my piece of shit is at work.. why does that interest you?

2.) first time out in that car.. then why talk it up LNEMUP... still can't get over how cocky (or should that be cockhead) you are. and when I asked you a while ago on this thread about your drag racing experience you dribbled on about a whole heap of shit that you've raced so you should have the experience to drag race properly, gearchanges, get the revs right, launch and so forth..

3.) Adrian doesn't talk up what he does. he just goes about his business and runs ridiculously good numbers.. so again, you have this ego about yourself/car that reminds of the young lebs I see around the shops who have taken steroids and done bicep and chest work and walk around with a chip on their shoulders.. maybe they had the license plate you originally wanted.

Why would I be jealous of ANYTHING that you have accomplished on here?

you accomplised a figure, on a dyno, which YOU calibrate. you've done nothing special.. you bolted on a bunch of parts that has been designed and made by other companies.

installed a computer "designed by another company" and made changes to parameters on it to change timing, fuel, air, and tuned your car to within an inch of it's life.

just because your car has been on the dyno for 11ty hundred hours doesn't make you my hero.

and I've got news for you.. when you run your 10 second pass, and post on here to show people the size of your E-WANG, I will reply with a "Congrats"

that don't mean I am jealous or wanking over anything..

you need to grow up mate.

if you want to impress me (and you know deep down you need people to be impressed with you), do something that others can't.

anyone with money and time can bolt things to a engine and do what you did.

go beat a world record using nothing but your own capabilities..

then it's impressive..

anyway, I assume you already don't have many friends due to your attitude, or you're upset cause your teacher kept you back for afternoon detention or something, I'll leave you to your penis extention.. I mean dyno numbers.

hope you run your 10 so we don't have to see your cocky updates on how you're "GUNNA" do this and that..

best regards

IBD14U2C4SIKNE55ULEH

I estimated the first time out ET and TS pretty well, not to be a smart ass, but to simply voice my opinion. I based this estimate on;

1. The power curve of the engine, it’s as peaky as you would expect

2. The heat soak it is going to suffer with no ambient air feed and no heat shielding

3. The obvious inexperience of the driver and his crew

4. The total concentration on engine, with all other items seemingly ignored

So shall we have another guessing competition for its second attempt?

Hopefully the driver will have learnt a few things, the heat soak issues will have been fixed and the crew will be able to get the car to complete more than 2 runs. Without any other changes I reckon;

11.9 at 123 mph

Anybody else care to have a go?

:D cheers :D

PS; keep in mind I tried to warn of items 1 and 2 and got insults in response.

Edited by Sydneykid
adrian drove the car first and second passes doing 13s and 12s running 114 and 117 or so MPH

then he got a third pass and ran 11s at 125 so like i said

12.9 @ 111mph (15psi, bogged launch, shakedown)

12.0 @ 116mph (20psi, spun hard in first, stuff-up)

11.7 @ 121mph (20psi, better launch, happy driver and owner)

Adrian doesn't talk up what he does. he just goes about his business and runs ridiculously good numbers..

You're too kind....no...really :D

Adrian

At MR GTST

Wheres your piece of shit

lets see you race

first time out in this car

at like i said i was only crossing the line in third gear

you wanna argue ill meet you somewhere and be happy to argue wit you there you said case

adrian drove the car first and second passes doing 13s and 12s running 114 and 117 or so MPH

then he got a third pass and ran 11s at 125 so like i said

when i run the number ill post it back on here so you can wank over it and type somemore shit and jealous comments about it

you dickhead

Time to calm down. Anyone else would have been sent packing by now.

Continue and i'll throw ya some points.

You've done nothing really constructive since you started this thread with more claims than a Demtel Add.

Its almost bordering on me deleting it.

The flack you are now getting now is a direct result of your arrogant attitude to begin with.

You can say it will "run 10z"... i could say that about my car aswell... who is more correct? No-one.

Until it does run a time, i suggest you stop saying "it will do this, it will do that"

This is a happy place. Not a place to come sprog about how good you are.

LNEMUP ..hhahahah

what a great saying..

:turned:

Adrian, Buster, Pauly D, as much as id hate too admit, this sounds like the RB25 version of the book, and it also has the sideline comments from people ive never seen at the track. this is big - But Adrian is still the best driver ever - and the best looking by far.

12.9 @ 111mph (15psi, bogged launch, shakedown)

12.0 @ 116mph (20psi, spun hard in first, stuff-up)

11.7 @ 121mph (20psi, better launch, happy driver and owner)

You're too kind....no...really :turned:

Adrian

it took you three goes , 11.1@ 119 back to back, fist drive ever in someone elses car, im yoda, your O B One HA Ha Ha

You're still far better looking though - and younger!

hahaha don't tell everyone that the book exists for GTST not everyone knows :turned:

This ones the armchair edition, but my favourite bloke anywhere at any time is Adrian. Damn, he's just so good I can barely contain myself.

:D

(Be careful who you mess with, Stuie!)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...