Jump to content
SAU Community

Recommended Posts

  • Replies 205
  • Created
  • Last Reply

Top Posters In This Topic

I got a 15second penalty on the back track for hitting cones, I think that would've cost me and apparently its a record for the biggest penalty on the Long wang. I messed up!

The skid pan was soo wet in the morning before it dried up, sort of like driving on a lake!!

I can't believe we still finished with such good results overall considering the weather in the morning.

That means Dane and I are 1 round each. Looks like the next one will be interesting!!

Wasnt a massively noticiable difference in the times between groups on the back track but there was a pretty big difference in times between groups on the skidpan.

For example between me and Scotsman -

Mines Datsun Run 1 -

Snowman - 43.12

Scotsman - 37.16

Schappy Run 1

Snowman - 37.28

Scotsman - 32.50

But...

LongWang Run 1

Snowman - 58.09

Scotsman - 59.13

Given that Chris should have killed me but we both ended up with 2 very bad runs where we both lost a lot of points so in the end it was very very close.

Infact just about everyone made a few mistakes this time - except for Christian in the forrester which is why he's finished in the top 10 (plus he drove that car well)

Also - we did use any results from the 2nd run of the Wang Busta because there was a significant number of cars that didnt get that run due to the storm.

Anyways - time for me to go find some dinner.

I got a 15second penalty on the back track for hitting cones, I think that would've cost me and apparently its a record for the biggest penalty on the Long wang. I messed up!

The skid pan was soo wet in the morning before it dried up, sort of like driving on a lake!!

I can't believe we still finished with such good results overall.

That means Dane and I are 1 round each. Looks like the next one will be interesting!!

Juz - take that result out and the one where you stopped on the skidpan trying to restart the car and you'd have had a super result.

are we still able to see the times even though they dont count? my 2nd run on the back track was my quicker one

*sorry misread*, thought you meant the backtrack runs (longwang)

Juz - take that result out and the one where you stopped on the skidpan trying to restart the car and you'd have had a super result.

That was while adam was driving. So he probably would've been a fair bit higher in the ranks.

so dane beat juz over a technicality? weaksauce! :P

Although checkin out the results, I can't really give Adam (newton) shit for driving a girly car like I was at the start of the day.

w00t for lowest score and being the first ones home. We ran into the red MX5 on the way back as well, looking at the scores it looks like it suffered a similar predicament to us.

Snowman - so does that equal first mean I get 3rd? :P

And that's a pretty amazing finish for first place considering! :)

Pete - when do we get to see vids - I can't wait! :)

matt

Edited by matlowth

So the only people I beat are the ones who retired early?

LOL, teh boat can nevar loose! :P

Guess I better add something useful here, to all the people that think about coming to DECA but don't......

shows that even if you come last you can still giggle your farken arse off allllll day!

Couldn't have done it without the mexican hats! :P

matt

was funny to see the taxi ride skidpan run

LOL - But at least you had fun! ;)

So the only people I beat are the ones who retired early?

LOL, teh boat can nevar loose! :D

LOL...that means he wins RWD :lol:

Champion :D

^^was a really good effort considering the wetness in the morning and the lack of opportunity to get some heat in his tyres

still... I'm off to buy semis tomorrow! :P

I got beaten by a 4 cylinder too ... eew

19 Justin Masters R33 GTST 356

Pretty happy with that for my first time out :D Didn't think I'd do that well, but I guess not hitting cones is the really important bit. Definitely plenty to work on for next one, and lots of room for improvement :P Will see if I can do some more skidpan work before the next deca. So much fun!!!

^^was a really good effort considering the wetness in the morning and the lack of opportunity to get some heat in his tyres

still... I'm off to buy semis tomorrow! :P

I got beaten by a 4 cylinder too ... eew

Dont buy semis...just borrow them... ;)

You always go quicker in someone elses car, it seems you go quicker with other ppl parts :lol:

Its an awesome effort since he fried his clutch in the morning...tops result for a pretty schtock car :D

Dont buy semis...just borrow them... ;)

You always go quicker in someone elses car, it seems you go quicker with other ppl parts :lol:

Its an awesome effort since he fried his clutch in the morning...tops result for a pretty schtock car :P

i asked jarrod if i could borrow them for 1 run.... didnt even answer me back :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...