Jump to content
SAU Community

Recommended Posts

Thats a nice and clean 4door abobob :laugh: . Ill be getting a yellow 2 door soon if everything goes well, one with same factory kit, eyelids etc. But the one im after comes with the huge ugly spoiler ;) wtf were they thinkin when they designed it haha its gotta go :D .

Somehow I missed all these extra replies.

_8OO5TED_ - 255rwkw at 0.9 bar

GCG highflow turbo

Nismo 480cc injectors

Tomei 260 degree Poncams

Wiseco Forged pistons (8.75:1CR)

Pro Engines oil pump drive collar

Blitz LM FMIC

CES and Fujitsubo exhaust

Nismo panel filter

MV Automatics valvebody upgrade and rebuilt trans to handle 300+rwkw

Bilstein Shocks

Kings Springs

Powerplay ROM Tune

Apexi AVC-R

Dual core copper radiator

Oil cooler

97r33gtst-typeM - they are still not common here in Australia.

silver gts-t - yeah something like those would be nice.

I'm not abo or arabic, I'm 6th generation aussie from 50/50 Irish and English blood. I will keep the nick so as to add to my online allure. :P

POOMBAH - Yeah it is good. Sometimes I wish I could stretch it about 3-4cm down without wrecking the lines.

Maxx - I've never seen series two in the flesh. In some pics it looks great, in others awful.

JUNR34 - The factory eyelids are the way to go. Better than the aftermarket ones unless you have a black car with CF bonnet and CF eyelids like E-Lu-Shun.

op1.jpg

That wing you are referring to is the Altia wing and is ugly as. When you take off the side sections they leave dirty great big holes in the rear quarters too.

  • 6 months later...
Somehow I missed all these extra replies.

_8OO5TED_ - 255rwkw at 0.9 bar

GCG highflow turbo

Nismo 480cc injectors

Tomei 260 degree Poncams

Wiseco Forged pistons (8.75:1CR)

Pro Engines oil pump drive collar

Blitz LM FMIC

CES and Fujitsubo exhaust

Nismo panel filter

MV Automatics valvebody upgrade and rebuilt trans to handle 300+rwkw

Bilstein Shocks

Kings Springs

Powerplay ROM Tune

Apexi AVC-R

Dual core copper radiator

Oil cooler

97r33gtst-typeM - they are still not common here in Australia.

silver gts-t - yeah something like those would be nice.

I'm not abo or arabic, I'm 6th generation aussie from 50/50 Irish and English blood. I will keep the nick so as to add to my online allure. :P

POOMBAH - Yeah it is good. Sometimes I wish I could stretch it about 3-4cm down without wrecking the lines.

Maxx - I've never seen series two in the flesh. In some pics it looks great, in others awful.

JUNR34 - The factory eyelids are the way to go. Better than the aftermarket ones unless you have a black car with CF bonnet and CF eyelids like E-Lu-Shun.

op1.jpg

That wing you are referring to is the Altia wing and is ugly as. When you take off the side sections they leave dirty great big holes in the rear quarters too.

dam that carbon bonnet looks good. im after the same nismo style one but cant find one anywhere, and the eyelids in cf too.

ohh and abobob ur 34 looks great.

Troy that story does not get published on the forums.

The mechanic who took it for the pink slip test drive bottomed it out but I don't. I raised the cooler while the car was out of action so it went up an inch and the car came down an inch.

I modified the front bar a little with help from 666dan.

My rims are cheap and nasty but I would love some nice black 18's. (maybe like these ones http://www.skylinesaustralia.com/forums/in...owtopic=106464) or better still some nismo lmgt4 or whatever they are called - I'm not very good with the names. Just don't have the cash atm.

abobob

do you have any close up pics of the lower lip of the front bar(where it says SKYLINE)? did you fill the holes after you cut that section out?

thanks

Most of my paint job is less than 2 years old. That helps. Also I give it a full wax twice a year and spot polish it during the year.

I don't think I've got any pics of that bit sorry but no I didn't full the holes. I've been meaning to but haven't got around to it and nobody notices it unless they go looking for it.

i have to say at first i didnt like 4 door skylines but i was pondering about it the other day and i think im almost converted.

talk about practical! you get the best of both worlds

but i really dont like 4door r33's whats the deal with there rear lights, some of them look so unco

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...