Jump to content
SAU Community

Recommended Posts

Ok, my RB20 has stuffed a big end bearing, so Im going to need to do something about it soonish. The problem is I have a pretty tight budget.

My options the way i see it are

A) Rebuild a lower K RB20 and swap it for mine.

B) Get a stock 4WD RB25DE, stick my R34 turbo on it and remap my R32 ecu to run it.

Im thinking I could probably rebuild the RB20 for around a 1k including buying an engine, but after reading 666DAN's posts I really like the RB25 idea.

Can anyone give me a ballpark figure on buying the RB25? (has to be the 4wd one remember).

What injectors do the NA RB25's have?

Would I be able to get it back up to my current 200rwkw?

Any help appreciated

Link to comment
https://www.sau.com.au/forums/topic/108081-r32-gts4-engine-options/
Share on other sites

Ok, my RB20 has stuffed a big end bearing, so Im going to need to do something about it soonish. The problem is I have a pretty tight budget.

My options the way i see it are

A) Rebuild a lower K RB20 and swap it for mine.

Any help appreciated

Depending on how long you are prepared to wait and how much you want to pay, I'll have a healthey GTS4 AWD RB20DET motor coming out of my car soonish. It'd save you money with being a bolt in, and not have to fark around making sure everything works.

na rb25 from an R32 has the same injectors as rb20det

about turboing it?

I don't know..

I'd go another rb20 or have a look at my HYBRID RB thread in this section where someone posted a link to building an RB24 and 22 and so forth.

however, if you really want an upgrade, you need the money.. then go rb30det or rb26dett

Its actually a T70 turbo - heres what he said:

I'll be finishing the Cefiro with the RB25DE + T70 later today so I'll scan that when we're done.

Last reading was 249 rwkw @ 17 psi

Completely STOCK RB25DE with a T70 600hp, 600x300x100 FMIC, GTR Injectors, Z32 AFM, Desno 600 hp Fuel Pump, Remapped R32 GTST ECU, and that's it.

Depending on how long you are prepared to wait and how much you want to pay, I'll have a healthey GTS4 AWD RB20DET motor coming out of my car soonish. It'd save you money with being a bolt in, and not have to fark around making sure everything works.

Yeah i have a problem with my RB20 as well and may need a new engine.

How much?

I've never had anyone be able to give me a straight answer on what is wrong with my car. I think its cursed :

Edited by MADGT4

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...