Jump to content
SAU Community

Recommended Posts

What do you fellas with Turbo Timers do when you're at a petrol station, refilling?

ie, with the turbo timer on, and the car running......

Im not that comfortable with the idea, and switched mine off. I would have thought it'd be very dangerous to be filling up your petrol tank with the car still running.

Link to comment
https://www.sau.com.au/forums/topic/108341-turbo-timers/#findComment-1997726
Share on other sites

Turbo timers = waste of oxygen (ie; rice)

Turbo timers = good place for a thief to get access to your ignition system

Turbo timers = nothing for your gearbox, diff or brakes

Throw it in the bin and cool the whole car down properly.

:D cheers :laugh:

Link to comment
https://www.sau.com.au/forums/topic/108341-turbo-timers/#findComment-1997732
Share on other sites

Good points (dont know about the 'rice' factor tho - each to their own!)

Plus add-in the fact they are illegal in SA (unless your vehicle weighs over 5T I think).

Mine was disconnected after the first week - I was embarrassed to fill up with the car still running (weird & dangerous), and couldnt stand listening to my car run for 5mins after Id gotten home, changed, had a bourbon & smoke, and then sat down to watch the news (with the damn car still running!@)

:D

Link to comment
https://www.sau.com.au/forums/topic/108341-turbo-timers/#findComment-1997750
Share on other sites

i have an old hks 1 that came in my car that ya can turn off or use pre-set times(30secs, 1 min, 3 mins or 5 mins)...i dont use it! if i have been boosting i will just drive my car around slow and softly for a lil bit or sit in it and let it idol for a lil bit then turn it off.

hey any1 kno where bout in SA(adelaide) i can get it taken out? im from victor harbor and i dont think there is any1 that can do it down here. and i havwnt heard of anywhere where i can get it taken out...oh that is for my "exemption from compliance"

cheers

Link to comment
https://www.sau.com.au/forums/topic/108341-turbo-timers/#findComment-1998098
Share on other sites

My turbo timers built into the alarm (autowatch) so i can remotely turn it off. I rarely use the turbo timer though, switching off at the same time as the car. Its good as there are no controls for anyone to touch or wiring to follow directly. Not too sure how good autowatch are though. Its set a minimum of 90 secs, but probably only let it run that much after ive done long drives.

cheers

Evil

Link to comment
https://www.sau.com.au/forums/topic/108341-turbo-timers/#findComment-2001124
Share on other sites

If the turbo isn't on boost then it's not much hotter if at all than if it was just idling. In fact my motorcycle starts to heat up when stationary/idling, and cools down again at low rev cruising, so if you are driving home off boost, start your "turbo time" from the last time you put your foot down and it'll probably cool down quicker than going from foot-to-floor straight to idling in your garage. And like SK says, think of the extra bits of your car that need cooling off like brakes.

I have the added benefit of having to manually lift my garage door. I leave it idling while doing this so by the time I've parked the car it's done plenty of cooling down and I then just switch the engine off. The car came with a timer but I never use it. If I knew where it was I'd remove it.

Edited by JimX
Link to comment
https://www.sau.com.au/forums/topic/108341-turbo-timers/#findComment-2001212
Share on other sites

Good points (dont know about the 'rice' factor tho - each to their own!)

It provides marginal (at best) performance or reliability benefits, which you acknowledged by crediting SK's points, while providing a security weakness. However, it does give you another flashing light in the cabin.

How is it not rice?

Link to comment
https://www.sau.com.au/forums/topic/108341-turbo-timers/#findComment-2003565
Share on other sites

dude.. if u have a TT and u fill up... u park, WAIT for it to turn off.. then pop the cap and fill up.. dont be fkn stupid.

also, if u are filling up for petrol, its probably cause your LOW, so u shouldnt drive on boost anyway. (towards the petrol station) so if ur TT goes on, should only be for 20-30 seconds.

Link to comment
https://www.sau.com.au/forums/topic/108341-turbo-timers/#findComment-2012426
Share on other sites

The majority of turbos are water cooled so there is no reason to idle down after a normal drive. If they are designed correctly, even with the engine off, water can still syphon through the turbo for a few more minutes after shutdown.

Its the older school oil cooled turbos with the crap oils they had back then that were a problem. A good synthetic with a oil cooled turbo is usually good enough not to warrant a turbo timer anyway.

Link to comment
https://www.sau.com.au/forums/topic/108341-turbo-timers/#findComment-2012536
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I myself AM TOTALLY UNPREPARED TO BELIEVE that the load is higher on the track than on the dyno. If it is not happening on the dyno, I cannot see it happening on the track. The difference you are seeing is because it is hot on the track, and I am pretty sure your tuner is not belting the crap out of it on teh dyno when it starts to get hot. The only way that being hot on the track can lead to real ping, that I can think of, is if you are getting more oil (from mist in the inlet tract, or going up past the oil control rings) reducing the effective octane rating of the fuel and causing ping that way. Yeah, nah. Look at this graph which I will helpfully show you zoomed back in. As an engineer, I look at the difference in viscocity at (in your case, 125°C) and say "they're all the same number". Even though those lines are not completely collapsed down onto each other, the oil grades you are talking about (40, 50 and 60) are teh top three lines (150, 220 and 320) and as far as I am concerned, there is not enough difference between them at that temperature to be meaningful. The viscosity of 60 at 125°C is teh same as 40 at 100°C. You should not operate it under high load at high temperature. That is purely because the only way they can achieve their emissions numbers is with thin-arse oil in it, so they have to tell you to put thin oil in it for the street. They know that no-one can drive the car & engine hard enough on the street to reach the operating regime that demands the actual correct oil that the engine needs on the track. And so they tell you to put that oil in for the track. Find a way to get more air into it, or, more likely, out of it. Or add a water spray for when it's hot. Or something.   As to the leak --- a small leak that cannot cause near catastrophic volume loss in a few seconds cannot cause a low pressure condition in the engine. If the leak is large enough to drop oil pressure, then you will only get one or two shots at it before the sump is drained.
    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
×
×
  • Create New...