Jump to content
SAU Community

Recommended Posts

Link

New Camera Mails Tickets to Noisy Cars

New technology allows police to mail automated tickets to cars with loud stereos and noisy exhausts.

Transportation officials are looking to expand the use of photo enforcement to cash in on motorists who blast their stereos or use modified, high-performance exhausts. At least one agency has expressed interest in a ticketing system developed by Acoustic Research Laboratories, a New South Wales company that developed acoustic detection equipment for the Australian Navy.

The fully automated setup mails traffic citations to passing vehicles that exceed a predetermined noise threshold. It can detect loud subwoofers, a noisy exhaust, or even an inopportune honk of the horn.

A combination of sound level meters, cameras and computer processors identify these targets of opportunity. Separate microphone and video modules are pole-mounted in waterproof boxes that communicate with a laptop control unit using WiFi. The manufacturer claims that the system distinguishes predetermined trigger sounds from general background road noise. Once the system is configured, it will generate up to 10,000 tickets before the on-board hard drive is filled. A 10-second video and audio clip is stored for each incident.

Similar red light camera and photo radar technology has generated billions of dollars worldwide. In Washington, DC alone, cameras billed drivers more than $171 million since 1999.

Link to comment
https://www.sau.com.au/forums/topic/110299-they-cant-be-serious/
Share on other sites

In Washington, DC alone, cameras billed drivers more than $171 million since 1999.

Victoria takes about $300 million *per year* and between it and NSW would have to be some of the highest revenue raising states through speed cameras in the entire world.

Without it the state government there would be bankrupt.

What a joke! This has so many inherent flaws too. What if some clown sits next to these cameras with an air horn as you are driving past to pi$$ you off?? I fail to see how this will reduce the road toll or encourage safer driving. And the thing that is really crap is that despite all of this extra revenue, we never see the roads improve.

omfg,

I couldnt imagine whats the future gona be?

U gona get told wat to do and wat is not to do.

Now SOUND camera?

I thought banning smoking in car while driving is bad enough.

I am a non smoker, but its geting ridiculus.

Edited by RBFIRE

Easy solution, just rig a speaker with a remote controling device to it (makeing sure it provides the right db of noise), place it on the noise camera... and go sit in a coffee shop nearby. when ever a copper drives past just activate for extra noise... hehehe

Speaking of new police cameras.

Today on my way home from work i spotted a policeman with a rather strange looking camera.Allmost like a real digital camera but slightly bigger,blue and black.and i cant be certain but i think it also had a cable coming from it.

This was on the hume at chester hill.

The little bugger was so camoflauged that i diddnt even see him untill i was nearly right on top of him.Lucky for me the traffic was moving slowly.no matter i wouldnt have had a speeding ticket from the outcome.

This comes as they are making a 15,000 policeman/woman increace throughout the state.

there just lucky this is australia and everyones too scared to do anything about it. if it was somewhere else... mass riots and shiz.

personal if i had the time, id stuff up every single camera i seen on the road.... might have to start now...

even if your car hasnt got an exhaust etc its the principle of the thing.

australia a free country my ass, the guyz in prison have more freedom then we do

What about motorcycles like Harley Davidsons? Also, how can they tell if you've used your horn for the wrong reasons (is there even a correct reason?) Large trucks? I think if they are going to put these cameras in then they have to be able to give us a proper limit in writing as to what is too loud and not "I think it's too loud, cause I said so!"

I like your thinking Triskillion, but 1 person isn't going to be enough. We need unity before anything else. We need to get every car enthusiast, whatever they're into (turbo, V8, rotatry, etc) and make a stand, once and for all.

Like you said, if this was happening somewhere other than Australia, there would be riots. They stand up for their rights in other places in the world.

Speaking of new police cameras.

Today on my way home from work i spotted a policeman with a rather strange looking camera.Allmost like a real digital camera but slightly bigger,blue and black.and i cant be certain but i think it also had a cable coming from it.

This was on the hume at chester hill.

The little bugger was so camoflauged that i diddnt even see him untill i was nearly right on top of him.Lucky for me the traffic was moving slowly.no matter i wouldnt have had a speeding ticket from the outcome.

This comes as they are making a 15,000 policeman/woman increace throughout the state.

That is most likely one of the cameras which detect stolen/unregistered cars

What about motorcycles like Harley Davidsons? Also, how can they tell if you've used your horn for the wrong reasons (is there even a correct reason?) Large trucks? I think if they are going to put these cameras in then they have to be able to give us a proper limit in writing as to what is too loud and not "I think it's too loud, cause I said so!"

thats a valid point, how will they distinguish between what to loud for a certain type of vehicle?

unless they are some form of super camera lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...