Jump to content
SAU Community

Recommended Posts

^ all good my boss mate found the bolts in bunnings... anyways results of clenaing the AAC is freaking awesome !!!!!! my car was like idle at 600 rpm for the last year or so and always started hunting when I used Aircon/heater this has fixed everything, cars running good as new !!!!!!!!!! thanks for the write up great guide.

^ all good my boss mate found the bolts in bunnings... anyways results of clenaing the AAC is freaking awesome !!!!!! my car was like idle at 600 rpm for the last year or so and always started hunting when I used Aircon/heater this has fixed everything, cars running good as new !!!!!!!!!! thanks for the write up great guide.

Your mate sounds like his pretty awesome :D

  • 2 months later...
  • 1 month later...

I was having issues with a rough idle after start. Revs were sitting at 4-500, or the car would cut out. I'd blip the throttle, then they would pick up to 1200 or so before settling down. I came across this thread whilst troubleshooting, and it sounded like the AAC valve needed cleaning. However, I found a leak on the vacuum line between the throttle body and charcoal canister (tiny...only a few mm), Replacing that hose has fixed the problem. Sure it has been said in this thread before...but check for leaks, might save you unbolting the AAC!

  • 1 month later...
  • 10 months later...
  • 4 weeks later...
  • 2 months later...
  • 7 months later...
  • 1 month later...

I wanna give my a car a clean this weekend too. If the gasket is not really re-usable, can we use one of those tubes you get at auto stores for making your own gaskets? Also should it be hardening or non-hardening?

On another note though could someone help me out with what the hell is going on with my aac valve? This is the third one that I put on there because I thought something was wrong with the aac valve itself, at idle it keeps on hunting as in the revs go up to about 2000 then down to 1000 up and down up and down, if I turn the headlights on it idles fine at 1000rpmish, I've just unplugged it for now and it's idling at 900 bit i really want to get it sorted out as its getting hot and when I turn the ac on the aac valve being unplugged doesn't compensate for the rpm drop, thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...