Jump to content
SAU Community

Recommended Posts

Hiya all

I would like to know if anyone has had any experiences with Geoff from Prestige motorsport and the guys from J-Spec. Is it much more convenient and less hassles to have your broker in the state that you live in (ie Melbourne) or doesn’t it matter? What do you guys reckon about these guys service? Which of these guys would you recommend in terms of service, bang for your buck and overall? Thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/11067-import-brokers-pms-or-j-spec/
Share on other sites

i dont have any personal experience.. but geoff from prestige motorsport seems to be a very trustworthy guy.. and from the opinions that i have heard.. its a bood place to get a car.. they also have a wide range...

Im in the process of getting a vehicle through PMS. It hasnt landed yet, but I can offer the following info:

1. Like any service, you only appear to get out what you need, but not necessarily much more. PMS is, probably for the better, set up so that all you have to do is tell geoff you want the vehicle, and then pay for it along the way. He is extremely helpful and very patient, and has been more than happy to answer any query that I have had.

2. Sometimes, and I suspect that this is true for all broker services, it may benefit you to know more information than geoff would provide to you, UNLESS YOU ASK! like when the next boat leaves japan, who is storing the vehicle in the mean time, whether the car can be test driven and what the actual cost of compliance is depending on your state etc. My advice is to ask as much as possible, so that you are informed about the whole process. Avoid letting yourself feel like you're wasting time asking trivial questions because at the end of the day, the fees for import brokerage and duties, gst etc. are actually about 60-70% of the overall cost of a twenty thou vehicle.

3. on a personal note, my car was broken into in japan whilst waiting to be shipped. this would have been covered entirely by wharf insurance, provided that repairs are performed in japan. only catch is - -> it NEEEDs to get on the boat before the repairs can be done. subsequently I will end up paying for the fitment of new locks and possibly some minor bodywork once the vehicle has landed.

Geoff has been very good through this process, and I get the feeling that he has extended himself beyond his professionsal relationship with his contact in Japan would typically permit to satisfy me that everything that could be done has been done.

Assuming that my new broom does not have any more badness befall it, i would say that if I had to go through the process again, I would still go through Geoff. At the end of the day, I will have a vehicle on the road for about $5000 less than the 'market' value through a dealer. HOWEVER, I would also add, that you should not aim to spend your budget on the car, but try to spend about $2000 less which you can keep as a contingency.

at the end of the day, the vehicle is cheaper because you assume the risk of bad stuff happening, like some ahole busting your door locks and you having to pay for the repairs, insterad of paying someone else to. So be aware that bad stuff does happen.

I see no reason why it would be better to go through someone in your state, unless it's to keep phone bill costs as low as possible, but I would suggest finding out the cost of compliance plates in your state prior to bidding onn/purchasing a vehicle to avoid any surprises, especially if you want to get something before the SEVS changeover.

I got my car through PMS and i have no hesitation with recommending Geoff. He is extremely helpful, helps out with weighing up the big decisions. I had the opportunity to bid on my car while i was in the pub watching the world cup. I declined because at the time i was an hour away from my email and he needed an answer.

Luckily because the car was so nice, it had a full GTR kit and had leather interior option, his supplier picked it up anyway, and i bought it off him :(

Its a harrowing process, but geoff can help out putting you onto the right people for compliance and so on. Makes it easier.

Red17

Geoff is super!

I've had mindless queries ... nothing to do with BUYING a car form him.

just general import questions and stuff and he's more than helpful.

And i know of people who have got great cars from him... also the prices are fair cheap too

I had no problem's with the importing of my Skyline with the help of Geoff from PMS. He answered all questions, had no hesitation in telling me details and supplied photo's and an honest assesment of the vehicle.

The only damage that occoured was during shipping, and Geoff stated that it *COULD* happen, unfortunatly it did, and the TV in my car was busted up due to the Australian Wharfies...RRRRR.....

Apart from that everything went smoothly, and I'm enjoying my Cheaper (than off the lot) Nissan Skyline.

How often can you say " Yeah I imported that myself...." that should win the chickies over.... he he he....(unless you're a fat ugly bastard like me....)

Cheers

Loz

hmmmm well for starters if i was shipping something with a telly...id be taking it out and sending it in the post....if he knows its gunna happen...why does he let you take the chance???And it seems to happen to every second person....not only that deal with him....to everyone

Good point, next time i do this then ill ask for things like that to be taken out.

Really it doesn't matter too much as it is easy to repair, and it needed to be converted over, so in the grand scheme it's a small price to pay as the conversion will cost the most.

I think it's up to the dealers in Japan, whether they will go to the extent of pulling thing's apart and sending them off. Really (I think) there should be more policing of the Wharf and liability for things damaged/stolen if it happens to cars....where does it stop???.

But you raise a good point .... I cant speak on Geoff's behalf, so i wont.

But next time, I will enquire about things like that.

Loz

It's interesting to read of all these experiences, as my R33 GTSt sedan is now on the boat & will, I hope, be parked at my place within 2-3 weeks.

I'm waiting nervously.

Most people I speak to have never heard of private imports so I'm writing an article on the process and my experiences with it.

I'd love to hear from anyone who's done it & how they've found the whole process, whether it's been good or bad & why.

Please feel free to PM me or email to [email protected]

Cheers - Sven

On the boat and at your place in 2-3 weeks.

Bwahahaha I doubt it. The issuing of the compliance plate will take that long , not to mention the work to comply , engineer sign off , inspection yada , yada , yada.

Cheers

Ken

Well, tell me how long you reckon it'll take.

The boat is due to land in Brisbane on Monday the 3rd.

The compliance plate is there waiting for it & the car's booked in for the work to be done, or at least started, next week.

So please, give me some words from the wise!

Originally posted by Lozza150

Good point, next time i do this then ill ask for things like that to be taken out.

Really it doesn't matter too much as it is easy to repair, and it needed to be converted over, so in the grand scheme it's a small price to pay as the conversion will cost the most.

I think it's up to the dealers in Japan, whether they will go to the extent of pulling thing's apart and sending them off.  Really (I think) there should be more policing of the Wharf and liability for things damaged/stolen if it happens to cars....where does it stop???.

But you raise a good point .... I cant speak on Geoff's behalf, so i wont.

But next time,  I will enquire about things like that.

Loz

well i take them out...i guess i offer sevices that they dont then....

Good Afternoon Kev,

As promised, here's my two cents. Firstly while I spoke closely wit Geoff, I ended up getting my car through Craig from J-Spec. There were basically two reasons why I did this. Regardless of where I went, the service, auctions, cars and prices would have been relatively the same. What tipped my over the edge was that Craig actually lives close to us and I could actually meet him in person.

Sure I can appreciate that the majority of the importers can work online given their reputation, however for that extra peace of mind, it doesn't hurt to meet with the man.

Now as for Craig's service. Let see, I consistently hounded him on a daily basis nominating cars that I wanted to bid on, he also went to the effort in looking at other cars in car yards to possibly find a deal. I actually came close to buying a car from a yard, which would have ended up cheaper, however this one came up first.

Being naive on the importing process, many a times I would ask him dumbass questions, as well as sending him SMS's all throughout the night, he did not seem to mind at all.

Now I'm sure Geoff offers the same quality of work. But I guess, what erred me to Craig was that he was at least he's in the same state as I am. Hope this helps. Thanks,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...