Jump to content
SAU Community

Recommended Posts

hey guys, just thought ild post up about my rebuild.. 94 r33 rb25

my old engine was running 270-280hp atw and although it would still get down and boogie, i decided i wanted to get mid-low 300hp mark but then i got a little carried away. i wanted to keep the rb25 in there too once the engine was out and machined ect ect then we threw in

aries87m forged pistons n rings

eagle forged rods

arp head and main studs

tomei poncams

tomei 1.5mm head gasket

acl racing bearings (main and big end)

full nissan gasket kit

os giken twin plate clutch

turbo side

custom hi mount s/s manifold

garret gt35r turbo with braided lines

turbosmart ultragate wastegate

new s/s intercooler piping

a/m 80mm throttle body and cable

greddy plenum

hks ssq bov

denso fuel pump

nismo 720cc injectors

new timing belt

wolf3d v4

k & n pod filter

themostat

i think thats about it, all the work was done by steve and the guys at top racing, who did an awsome job and were very helpfull (as i dont know to much about engines) and if there was a problem i was called straight away.... i only got it back monday and only lastnight finished my set km's to run it in, while running it in the rev limiter was set at 4000rpm, so shes goin back in there hopefully this week for the final tune, and i'll let ya know what numbers we get out of her,... a new diff and gearbox is on the save list next to we can go a bit harder maybe, but im not a tuner so i dont know ahhaha..

john also painted the engine and timing covers for me in an awsome white and purple pearl, some pics belove

cheers guys

post-10720-1143340032.jpg

post-10720-1143340259.jpg

Link to comment
https://www.sau.com.au/forums/topic/111110-my-rebuild/
Share on other sites

  • Replies 112
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

um i dont really know what hp we will get, im not a tuner, untill i get a new diff and gearbox i dont want shit to go bang... im hopin 400+ on a safe tune,who knows..

dint take to long month and a half, but we waited on parts more then anything, and the chinese new years aparently hold things up this time of year...

Link to comment
https://www.sau.com.au/forums/topic/111110-my-rebuild/#findComment-2052038
Share on other sites

aries87m forged pistons n rings

eagle forged rods

arp head and main studs

tomei poncams

tomei 1.5mm head gasket

acl racing bearings (main and big end)

full nissan gasket kit

os giken twin plate clutch

turbo side

custom hi mount s/s manifold

garret gt35r turbo with braided lines

turbosmart ultragate wastegate

new s/s intercooler piping

a/m 80mm throttle body and cable

greddy plenum

hks ssq bov

denso fuel pump

nismo 720cc injectors

new timing belt

pistons can be had for around 1400

rods a little more

cams are like 1k a set , gears around 400 bucks

see where im heading... add the sum of the parts together, then add labour, you might get a price without having to ask

Link to comment
https://www.sau.com.au/forums/topic/111110-my-rebuild/#findComment-2057716
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...