Jump to content
SAU Community

Recommended Posts

  • Replies 126
  • Created
  • Last Reply

Top Posters In This Topic

The day is FULL, though there are several people on a waiting list.

If for some reason you need to pull out, please contact Tony at [email protected] ASAP so your spot can be filled by someone else.

Please see the entry list on the WRX forums - HERE

IMPORTANT NOTE TO ALL COMPETITORS

Copied from the WRX Forums -

Due to the overwhelming number of entries for our Anzac Day event, we will have a reserve list of entries in order of acceptance.

Basicaly, these will be the entrants who will slip into the event should someone pull out, or not show up in the morning. This list will be up later today on the acceptances thread.

As a result of our numbers it is imperative that everyone gets to Driver's briefing on time as YOUR spot may be forfeited if you are not present and have not signed in before the roll call.

It would also be appreciated if everyone can ensure that their car is ready to scrutineer and make sure ALL documentation including membership cards and licence are in order.

Any hold ups may affect track time, and we want to get on track as soon as possible to provide maximum track time.

Please affix your competition number securely with race tape not packing tape preferreably as this sticks to the number

A reminder also that the 75db limit is usually strictly enforced at Sandown due to local residants We have no control over this aspect of the day.

Finally, have your membership card ready at the entrance gate as you may be asked for some identification before entering the complex.

Tony Dalleaste

Motorsport Director

Impreza WRX Club

If they are glass you should. Though sometimes the scrutineers miss it. If its rainy and dark then you will be using them and a good idea to tape them up. Some Cheap clear contact will do the job, just be sure to get it off as soon as you are done as the heat fromt eh light can kinda bake it on and a 30 second job of removing it turns into a 10 minute job requiring acetone

great day

Well a big thanks to the one and only BRISBY! for making mine and my dads day great, and to say it has put the biggest smile on my dads face no one could remove. (Brisby helped my dad in driver training) Thanks again man

Scott and John

A birdie tells me a certain Lada driving official would sure like a drive of an R34 capable of punching out 1:20s :(

I had a ball today. Great fun going round with John...and thank god after the quick cooler pipe fix, the R33 was free of my curse :)

...but yeh,,, good to see everyone still smiling despite the few problems seen on the day...and ditto, the officials once again donating their time.

That said, i am so keen for the next Sandown...massively keen to see if i can improve on my last attempt

Good work everyone. Great day, great times, no incidents :(

BTW: I think I need a faster car - SuperLada didn't even top 90kmh up the back straight.

Good to see other clubs involved, but I must say I have removed the word 'clubman' from my Christmas card list. Mostly nice people - but two things during the day did not particularly impress me, nor win my favours. That is all I'll say.

Also - that Rarri is so porn. I LOVE it.

Thankyou to whoever broke their cars this morning and got jarrod and myself out there! (hope all is well) was an awesome day, sandown is such an awesome track, even if ya rotors are corrigated... Thanks to the officials, flaggies and timers etc, was well run. (I think they need to introduce an oil/fluid flag so people know to stop ASAP). anyway, ill be posting up some pics tommorow.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...