Jump to content
SAU Community

Recommended Posts

Ok guys, my 165rw/kw is getting bit too plain now.. Needing more shove in the back acceleration :D My R33 is virtually stock as a rock except for the 3" split dump and 3" exhaust and K&N panel filter... Now my next mods are:

FMIC

Aftermarket ECU + Boost Controller

Injectors

Fuel Pump

My questions is, what specs of each Mod should I go for in order to accommodate future engine re-build or larger turbo... in other words what FMIC size would be good enough for a larger or hi-flowed turbo and 15+ psi? What size injectors and fuel pump would be sufficient for 250+rw/kw applications? etc...

Another thing, what mods are recommended to increase bottom end power? up until 4500 RPM when the VCT kicks in, there isn’t much power on bottom end as shown on my dyno graph...

post-23753-1143955584.jpg

Thanks heaps guys! Any info will be greatly appreciated!!!

Kind Regards,

Sarkis

Well R33's come out of the factory with a lead+iron composite monocoque, so acceleration is a problem :D.

ECU+EBC will help bring the full boost on earlier. For 250kw+ you will need to look at injectors, fuel pump (Bosch 040/044) and a bigger turbo.

the first question to ask is what do you want to do with the car?

from there you may have an idea about what sort of accelleration, handling and braking you want to aim for in a compromise with driving in traffic.

Power is only one aspect.

i dont belive that you will need injectors for 250 as i have 300 rwkw with stock ones but i suggest you get a huge mofo pump like a 044 and a bigger fuel pressure reg a ecu and bigger turbo fmic ebc and bobs your uncle if he can tune lol

Ummm nope, injectors and pump in R33's are meant to be at max around the 200rwkw from what i beleive....

he isnt talking about a standard pump he is talking about having a huge pump and fuel reg to achieve the absolute max out of standard injectors. Whether you could achieve 300rwkw im not agreeing though you certainly achieve more then 200rwkw with various other fuel system modifications.

Ummm nope, injectors and pump in R33's are meant to be at max around the 200rwkw from what i beleive....

umm yes you can maybe you should try it as i have i have a bosch 044 motorsport pump surge tank malpassi rise n rate fuel pressure reg and i get more than enough fuel for my car

pick a power figure and how much money you have then aim for that, dont pick one and then go ill maybe change it later on cos you may buy the wrong parts. my advice go for a drive in a 200rwkw skyline and then decide. its at least 6k of parts involved to get 200rwkw. my next step for your car would be ecu and fmic + boost controller.

yeah but it wont drive no where near as nice and safe as a properly tuned and setup car. ie ecu, fuel pump, split dump exhaust. and i would also doubt that power without a piggyback

fmic 1200

exhust 1200

ecu 1000

boost controller 300

tyres 500

suspension 1000

cold air intake 350

thats using rough pricing, which is reasonable also

sorry i wasnt talking about suspension i was just talking about motor mods

yes i belive he might have something wrong with those injectors at 90% with my power i have at the moment im overfueling the car and thats with over 300rwkw

This is a package i do regularly for customers.

1) Walbro 500hp intank pump $310.........no need for surge tank or reg etc.

2) Hi flow turbo (bush bearing) $1350.......uses all factory plumbing & ducting

3) Apexi Power FC $950..........plug in, no installation cost.

4) eBoost1 on special for $550.........note that car will see 15psi with hiflow turbo. so if thats enough, you wont have to worry about boost controller & sometimes can get away without computer. If yor looking to run anymore boost then ECU and EBC are necessary.

5) Good quality intercooler & pipework, either PWR or Hyperflow core with long pipe being before core and not after like you see on most cheap kits. $1000

6) Good quality split dump & cat, whic you already have.

This package is extremely streetable, cheap to install and retains stock appearance under the bonnet.

Will see between 200kw 230kw.

Tune car & see what you make, upgrade injectors where necessary.

Ok guys, my 165rw/kw is getting bit too plain now.. Needing more shove in the back acceleration :( My R33 is virtually stock as a rock except for the 3" split dump and 3" exhaust and K&N panel filter... Now my next mods are:

FMIC

Aftermarket ECU + Boost Controller

Injectors

Fuel Pump

My questions is, what specs of each Mod should I go for in order to accommodate future engine re-build or larger turbo... in other words what FMIC size would be good enough for a larger or hi-flowed turbo and 15+ psi? What size injectors and fuel pump would be sufficient for 250+rw/kw applications? etc...

Another thing, what mods are recommended to increase bottom end power? up until 4500 RPM when the VCT kicks in, there isn’t much power on bottom end as shown on my dyno graph...

post-23753-1143955584.jpg

Thanks heaps guys! Any info will be greatly appreciated!!!

Kind Regards,

Sarkis

Edited by Bezerkly

hahah oh ok..

Hey Paul, what is your thoughts on nankangs?

They have them around the corner from my house (45-235-17) for $150 balanced and fitted. Ive heard drifters use them even in competition. Though I guess grip isnt an issue.

I previously had bridgestone Re040's which were around $330.

cheers

Thats each aswell not for 2 hahahahah

off topic but ive tried pzero's 255, dunzlop dz101's 255 and now hankooks 255. i never heard anything good about the nanhanks and sound like a cheap tyre to me. good rubber is generally a fair bit, i was suprised on the pricing for the hankooks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...