Jump to content
SAU Community

Recommended Posts

Hey guyz, i had a prang last week, and need to make a claim into my insurance

Now im with justcars, and ive told them all my mods except for the ones i just put on recently (Fmic)

Also i have un aftermarket steering wheel, that also not on the policy.

Will i need to take these off b4 the assesser comes out?

and if so, does any1 have a stock r32 steering wheel i could borrow, im in epping

Let me kno

Thanks Joe

Link to comment
https://www.sau.com.au/forums/topic/113292-insurance-claim/
Share on other sites

well this is how it goes.... it was raining last week, going around a bend at around 45km, went to brake, foot went all the 2 the ground, i pushed it again, and it was spoungy, and it locked up and kinda kicked out, i went up on the curve, then the grass was wet, and it kicked me back onto the rd, where i hit a parked gemini

damage to mine was cracked front bar, smashed headlite, dinted bonet, and it kinked in the middle of the bonnet, no damaged 2 fmic.. lucky

so u reckon leave the fmic and steerin wheel on??

Don't be so paranoid, they won't send anyone out they get the smash repairer to take digital photos and then email them. How bad is the damage? Did you damage the new gear?
Link to comment
https://www.sau.com.au/forums/topic/113292-insurance-claim/#findComment-2088833
Share on other sites

Bit of a bugger that hey, it'll work out, what was the damage like to the gemini? I wouldn't worry about the wheel really I had a EL GT wheel in my AU Ghia V8 when I totalled it (got it back before it disappeared though). The IC if it's an easy remove then best to be safe but I wouldn't worry too much.

Link to comment
https://www.sau.com.au/forums/topic/113292-insurance-claim/#findComment-2088861
Share on other sites

yeh quote from the gemi was 2800 so basically ride off

my excess is like 2200 so thats a crap bit...

but i want my car fixed

Bit of a bugger that hey, it'll work out, what was the damage like to the gemini? I wouldn't worry about the wheel really I had a EL GT wheel in my AU Ghia V8 when I totalled it (got it back before it disappeared though). The IC if it's an easy remove then best to be safe but I wouldn't worry too much.
Link to comment
https://www.sau.com.au/forums/topic/113292-insurance-claim/#findComment-2088880
Share on other sites

and aftermarket steering wheel (generally speaking) isnt illegal on an R32 because there is no airbag to start with....as long as its not ridiculously small it should be fine...

FMIC isnt illegal either if you have stock airbox etc...as 1 intake change is allowed

however having not listed either may work against you...then again they may not bother.

if they give u any trouble you could tell them they were just installed that day or something ...

Link to comment
https://www.sau.com.au/forums/topic/113292-insurance-claim/#findComment-2089162
Share on other sites

FMIC isnt illegal either if you have stock airbox etc...as 1 intake change is allowed

It would be if the Reo was chopped/bent/grinded to fit the FMIC

Thats what a lot of people dont realise... many dodgy shops just butcher the reo bar... and if insurance for whatever reason wanted to assess the cars themselved... and found that ... forget it

Link to comment
https://www.sau.com.au/forums/topic/113292-insurance-claim/#findComment-2090509
Share on other sites

I'd take the cooler off just to play it safe, I don't think its worth risking not getting the payout and damaging your future insurance costs.

I agree just take the cooler off, to be on the safe side, Im also insured with just car insurance..

Link to comment
https://www.sau.com.au/forums/topic/113292-insurance-claim/#findComment-2092823
Share on other sites

luck of the draw apparently...

I have 4 mates that have writtten of their jap imports over the power to weight ratio, 2 r33 GTSTs, 1 180sx (SR20) and an S15. All got paid the entire amount on their policy, all were with just cars.

Link to comment
https://www.sau.com.au/forums/topic/113292-insurance-claim/#findComment-2092844
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...