Jump to content
SAU Community

I'm Calling You Out Memph (aka Steve)

oscar32

By oscar32,
in Victoria

 Share

Recommended Posts

oscar32 Mentor

oscar32

Posted
Posted

Hey VIC SAU'ers..

Since August last year, I've had some dramas with Memph.... aka Steve. I bought an oil pressure gauge, water temp gauge from Memph (Steve), and both didn't work. He REFUSED to return my money, saying he didn't have any to give me.

Steve sent me a steering wheel in exchange as he couldn’t afford to give my money back (and I felt for him and his story). The steering wheel, although in its box was too poor to put in my car, scratched and looking shabby (not as described at all - he said it was like new).

So, again, feeling bad for Steve I didn't insist on my money back.

I bought some R33 GTR "V spec" (although now I don't think they are even v spec ones, just stockers) cams off Steve, and they were not fresh machined as stated. He says they were, but the rust speaks for itself. I have now been told they don’t work- although there is enough grey area as I knew the issue prior to purchase. That said, they were not fresh from a machine shop as described.

Steve then stated I should have done more research.

Admin is well aware of this issue.

When I talked to Steve about this, initially he was helpful but ignored me once I wanted anything back. He is happy for me just to leave it as is. I told him I would give everything back to him - then I got a PM with him keen to meet up.

So, anyone else had any drama's with this guy? I'm down $450 bucks and have a bunch of usless crap. I'm not happy, and Steve sure isn't helping.

Link to comment
https://www.sau.com.au/forums/topic/113409-im-calling-you-out-memph-aka-steve/
Share on other sites
  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

oscar32 Mentor

oscar32

Posted
  • Author
Posted

Ok, I didn't explain this well.

Initally when I bought the gauges, Steve din't have the money to pay me back. I accepted this (having been a student myself) and took the wheel insted of cash. When I found out it was shonky, he offered me these "fresh machined" cams at a discounted price, at the time it seemed a good idea - and again I felt sorry for him being a poor student with no money to pay me back. I'm prepared to admit thats a bit stupid, however I was just trying to do the right thing by someone whos story I beleived.

Anyhow, I know there was an issue, however Steve told me the V spec cams were different to the standard ones, and these were fresh.... which clearly they are not.

I waited to give him time to fix this issue, and now after speaking to admin this post was the next step.

inark Grand Master

inark

Posted
Posted

lol memph...

funny bloke... when he was first trying to buy a skyline he wanted mine when i was selling... then came and wanted to take it to a mechanic mate of his who knew lots about nissans... LOL

Went all the way out there and he reckoned it needed 3ks worth of work to get a RWC... LOL again. Not being that stupid and knowing what the car was worth at the time i obviously declined the offer and drove it home.

Took it to a mechanic i had never used before and it cost me about $300 to get RWC (second hand tyres and a wheel alignment and replaced a steering arm). Was a nice try tho :)

Recently I swapped a FMIC for a R32 gear and dash surround and $100 (my way).. was a JustJap cooler so only cost me about $145 cause i got it at a christmas special ;) so i was happy.

oscar32 Mentor

oscar32

Posted
  • Author
Posted
Its definately not the same guy as I used to know Steve personally

Yeah, I'm pretty sure its not. And, I know a few people who have had trouble free dealings with him. Thats just not what I had....

Neddless to say, even withthis post he still hasn't communicated any type of deal with me (expect he'll take the parts back rather than me throwing them out).

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      What accelerator cable can be used with greddy plenum

      By Duncan · Posted

      I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • V36
      What accelerator cable can be used with greddy plenum

      By V36 · Posted

      HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...