Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just a quick question - at the moment when I turn my stereo up a bit higher than ambient, I've noticed that my dash and my headlights dim slightly when the bass kicks in.

The setup I have currently is just a Panasonic head unit, and a Pioneer 700W Amp powering a Sony sub, the other speakers in my car are run off the head unit.

I'm wondering if a capacitor will solve my problem of my headlights dimming or if it is something else I need to check out? I replaced the battery in my car in Feb as well if that is of any consequence.

Thanks in advance for any advice!

Link to comment
https://www.sau.com.au/forums/topic/113638-headlights-dimming-at-volume/
Share on other sites

Hi Space Ninja,

With your headlights dimming a capacitor will not help in this situation.

The Job of a capacitor is to provide a quick discharge of current to a high current device, like an amplifier. You might find that the cap will help you for 10 seconds or so, but for the long run it will not work.

The way to fix the problem is to

- upgrade battery

- upgrade earth between battery and car chasis

- upgrade the charge wire between alternator and battery

- change regulator voltage from 12v to 14 v ( this charges your battery at a higher rate)

It's a lot, but i can tell you from my experience over the 10 years or so that a capacitor has never resolved this problem in any model of car.

Cheers

frx026

Hey Guys,

Just a quick question - at the moment when I turn my stereo up a bit higher than ambient, I've noticed that my dash and my headlights dim slightly when the bass kicks in.

The setup I have currently is just a Panasonic head unit, and a Pioneer 700W Amp powering a Sony sub, the other speakers in my car are run off the head unit.

I'm wondering if a capacitor will solve my problem of my headlights dimming or if it is something else I need to check out? I replaced the battery in my car in Feb as well if that is of any consequence.

Thanks in advance for any advice!

Hi mate,

Actually a big cap is exactly what you need.

Yes, of course improving your earth, and wiring etc is certainly going to help - but a bigger capacity battery is actually only "more" load on your electrical system.

The battery is "in use" so to speak when your car is not running.

When your car IS running, then the Alternator (which is above battery voltage) is supplying all the "loads" in your car. Loads include your dash lights, headlights and so on - your car amplifier of course - and, your battery - because the alternator is trying to "charge" the battery. A bigger battery can demand more to be charged than a smaller one.

Anyhow - getting back on track.

Most loads in your car draw current in a constant sort of way. Your amplifier is the one that doesn't and will demand current in a dynamic way. Naturally the Bass takes up big chunks of power which is hard for the electrical system to keep up with. A large capacitor has the ability to release a great deal of current extremely fast and so can help "fill in" these sudden demands on current. The electrical system usually has enough time "in between the beat" to top up the Capacitor for the next beat.

You just need to make sure you have enough "cap" for the demands and see that the wiring from the cap to the amplifier is sufficient.

Easy test - get the Car Audio place to run the wires around the outside of your car and wire up a cap into your amp and see if it makes a difference. If they want to sell you a cap - its an easy 10minute test?

M

:P no no no u don't get a cap, your lights are dimming because your little battery can not put out many amps. upgrade your battery. My bettery in my R33 GTST can put up with its high beems and the eclipse 1500watt sub at its max and all my 6 speakers are amped up. And i can still start up my car after.

actually - battery and earth do the battery to body and the body to engine one with 2awg or better cable that will fix the current loss . bigger battery would be on the cards also as soon as you notice the dimming.

caps are a patch for a MUCH bigger problem and 99% of the time are NOT needed.

Light dimming, obviously you do not have enough power for the system you are using. Earthing is really important…use the Raizin Volt stabilizer, see if it is enough

http://www.the-pivot.co.jp/product/se/raizin-e.html

If not, it entirely depends on the usage of your sound system…

If you listen a lot to music with heavy bass such as R&B where a lot of power is required for the subs then you’ll need a good battery and a capacitor.

On the other hand if you listens to Michael buble, or Norra Jones, where minimal bass is required, then a good battry is sufficient

However before buying do consider these...

1- cheap capacitor

a sub-quality capacitor provides extra power in the form of pulse...so it's not a continuous thingy...like what frx026 said....prolly 10secs? you can get these for abt $150?

2- Good quality capacitor

A better quality capacitor provides continuous power...however these cost around $350 and on top of that these capacitors are thirsty..they store the power for Infrequencies (when you turn on your sub hard)....the alternator in turn take more power from the battery...

The battery is meant to be charged by the alternator..howerver the capacitor will suck more power than the alternator could generate…which results in having a flat battery within 1-2 month

3-Installing good quality battery

Usually a more expensive battery are designed to go flat charged and flat and charged…for multiple charging… i.e you can always have a jump starter pack and when battery went flat just jump start.

4- Installing good quality battery

The amps will draw power straight from the battery depending on the type of amps you’ve got…there are two types…

a) where watts depends a lot on voltage (such as Soundstream)

b) where watts does not depend so much on voltage (such as JL)

For type a) small battery would affect the sound quality substantially…..

5- Most importantly

The capacitor although stores power, In the end the power source come from the battery.. having a good capacitor with a bad battery will be pointless…

Hmm interesting, a lot of divided opinions - but from the sounds of it, even if I got a capacitor, it would only be a stop-gap measure.

I replaced the battery in Feb and I had an auto electrican re-do the terminals and wiring for it in the boot. Would there be any benefit from replacing the wiring between the battery and amp/sub ? At the moment it doesn't look that fantastic, but its not that bad either.

As for a better earth from the battery to the car, I'll check this out and see if I can make it any better - From what I remember I think it was pretty decent (I think the auto electrican did that at the same time)

  • 2 weeks later...

Stop lights dimming

something i came across when trying to learn about car audio myself. this article is short and simple, but my knowledge increased 10 fold from it. it says it all in the last two paragraphs:

In 99% of cases these simple steps will solve any problems you have with lights dimming, etc. Caps are worthless, spend the money on cable or battery upgrades.

And remember, I run 5000WRMS (380A current draw) into a pair of 15"s, 400WRMS into a 6" front stage (100A current draw) and a pair of Hella 100WATT spotlamps for a grand total of around 500A of current draw @ full song...

All off a single Odyssey battery & stock 60A alternator without the headlamps/spotlamps dimming at night.

capacitors... lol

To solve the afore mentioned issues we quite often install earthing kits. This assists in solving many of things mentioned in the post above. :mad:

For a little more information read these at your leisure:

http://www.fastfoursforumscarclub.com/temp/ground_2.jpg

http://www.fastfoursforumscarclub.com/temp/ground_3.jpg

http://www.fastfoursforumscarclub.com/temp/ground_4.jpg

http://www.fastfoursforumscarclub.com/temp/ground_5.pdf

For photos of them in situ see here:

http://www.fastfoursforumscarclub.com/temp...asp#interest8_4

:P

Edited by Fhrx

what is a capacitor for? if its not to take load off the battery and alternator what does it do? im confused. everyones got there opinions on how to fix the problem but those that are against a capacitor, what do they do if there a waste of money? why would you need one? i always thought the bigger gauge wire you use the better current flow you get. but theres too much current being demanded if the lights are dimming so how is bigger wire gonna help? im not trying to be smart i seriously dont know what the answer is. i was told you need a bigger alternator for dimmiing lights but thats just what i was told.

what is a capacitor for? if its not to take load off the battery and alternator what does it do? im confused. everyones got there opinions on how to fix the problem but those that are against a capacitor, what do they do if there a waste of money? why would you need one? i always thought the bigger gauge wire you use the better current flow you get. but theres too much current being demanded if the lights are dimming so how is bigger wire gonna help? im not trying to be smart i seriously dont know what the answer is. i was told you need a bigger alternator for dimmiing lights but thats just what i was told.

a capacitor just stores up electrical energy, then will release it on demand (like a big bass note) as not to suddenly place massive strain on the battery, and in theory, they're a great thing, but in reality, it seems most people agree, they dont do jack sh*t. maybe in a competition SPL car or sumthing, where they use quick 'burps' to get their highest SPL, it may benefit them, but as an everyday hting, they dont really do that much (thats the general consensus, i've not had any real experience with them).

in alot of cars, the stock alternator will be ok for even some serious stereo upgrades (read the quote in my previous post). my understanding of the bigger earthing is that the stock earthing is the thing that cannot carry enough current, not the alternator being too weak. think about running very small fuel lines to your fuel rail. u may have a bosch 044, but it still wont do anything cause the lines can't carry the fuel. gurus please correct me as im sure sumthin above is wrong :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Great work! Give it a clean up with some Emery paper, and I'd run a thread die over the threads too to clean them up. It will make reinstall much easier, and also life easier for the next time it needs to come out.
    • I'm not a fan of high humidity, it's one reason I don't mind being further inland out Ipswich, except the last 3 odd years, the drought broke, and it won't stop raining, which is making the humidity nearly unbearable when the rains are in during summer! For me, my body hates the cold, once the cold sets into my body, I'm totally screwed. I end up with severe muscle spasm in my back/shoulder muscles, and it feels like someone is trying to tear the muscles out. I have no issues with it getting stupid hot, so long as the humidity goes away. So the last 3 years as above, have been woeful! Ha ha. However, June 1st, and I'm only just converting from shorts and a tee, to long pants and a t shirt. And that's mainly as it's a bit wet and miserable and I wanted to work on a car.
    • I much prefer colder weather to hot weather, and especially prefer cold to hot and humid, Goulburn does gets pretty warm in the hotter months, but, I've found the humidity there is not as painful as even Sydney, the humidity up north is to oppressing for this old rooster  In saying this, it does get rather "nippy" in Goulburn for early morning, late in the evening walks, but nothing that a layer or two, some thermal gloves, and a beanie doesn't fix to make it an enjoyable experience, which is much more bearable to me than the oppression of heat and humidity,  especially at night when your trying to sleep If I recall correctly, a "wise man" once said that the "Southern Tablelands" was gods country, and I will not argue that point with him for the fear of a "permaban" LOL In car part related news: My intake is currently in Botany getting processed for the last leg of its shipping journey to my door   
    • Had a go at the stuck crush tube this afternoon. Tried things like grips and a chain wrench first but wouldn't just twist straight off. So got to work with a drill. Started small and kept a depth stop on to make sure I didn't drill into the bolt. Made a line of drill holes all the way up and enlarged them. Then a combination of chisel and Dremel to split it all the way up. Levered the split to get oil in there and eventually it gave a bit while levering. Worked it back and forth with loads more oil till it was spinning freely, then with grips I could work it downwards and off. And no significant damage to the bolt (not by me anyway - just the 27 years of rust)
    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
×
×
  • Create New...