Jump to content
SAU Community

Rb25 Into An R32

thinh

By thinh,
in Engines & Forced Induction

 Share

Recommended Posts

thinh Enthusiast

thinh

Posted
Posted

I have just bought a fairly stock 1989 r32 and have a few grand spare to either get a rb25 conversion or to just make my car pretty..(e.g wheels,bodykit) At the moment it has the typical mods, AVO front mount, BOV, r33 turbo,

A friend of a friend offered to install an rb25 for $2500 (is this cheap??) I am not very mechanically minded so my main concern is whether i need to spend more money on upgrading other components to with stand the new engine.???

Secondly, is it really going to make much difference in power..Or am i better off spending $2500 on other mods.

If the power difference is not that noticable then i would prefer to make the car look a bit prettier first.

If anyone has any advice that would be ace.....i have tried for hours on the forums and found similar topics but nothing with the answers im looking for...

Link to comment
https://www.sau.com.au/forums/topic/114144-rb25-into-an-r32/
Share on other sites
Bunta Grand Master

Bunta

Posted
Posted

Ok first things first...Predator on this forum is going through this now, So I would shhot him a PM about the costs ect

I have a R32 with RB25 and R33 gearbox that makes just over 200rwkw....and I have gotta say it is awesome!!! I have owned a r33 aswell and I could not beleive how good the rb25 is in a lighter car...the good news is you will be able to swap most of the mods you already have over to the rb25 so you wont have to have a stock rb25 either!!!

So yeah the conversion is really worth it in my opinion

bretto Proficient

bretto

Posted
Posted

i got a 32 imported from japan that has a rb25 in it, its my 3rd r32 and the first ive owned with an rb25 and mate the power difference is unreal, but i think the best thing about having the rb25 is the potential u have to make big power over the rb20. if i was choosing looks or power id definitely be going the rb25 over a new set of wheels. just depends how much u like your rice :laugh:

Roy Grand Master

Roy

Posted
Posted

$2500 is cheap considering you will need obviously an engine, modified loom and a new ECU, the engine will need to come with injectors AFM etc. Then you have to worry about the additional torque that the RB25 makes and what effect it may have on thegearbox. Some ppl get lucky and have gearboxes that hold together at higher power and torque levels, others prove delicate and break just driving normally. Also check with local vehicle registry to ensure the transplant is legal, as you will need to chnage the engine details on your rego and may be pulled up if they pick it is a larger displacement engine...which depending who you are insured with may also have its share of problems. Seems to be a good upgrade though if you can get a healthy engine installed for so little an outlay.

predator Grand Master

predator

Posted
Posted

spend the money on the performance.. visual mods just attract attention and in the end don't make a better driving experience.

$2500 is not bad price if that includes the engine? the swap itself is easy and the guts of it can be done in a weekend.

mine's taken longer, as I've converted mine to manual and just fixing or replacing the smaller things, tracking down those missing hoses, etc to make sure the engine will be reliable with hard use... and the fact I am working out the wiring very slowly :laugh:

you can also realise some of the benefits on an rb25.. replacement parts easier to track down as r33 everywhere, tuners more familiar with rb25's, rb25 powerfc cheaper, certain parts are no longer made for rb20, etc later on down the track.

I'm going to write a full guide with photos, etc when mine is done..

BHDave Grand Master

BHDave

Posted
Posted

If the 2500 includes the engine, then do it.

If your mate is charging you 2500 for the install only then punch him in the chops.

I installed my own and including the cost of the engine had it installed, wired and running a new timing belt and water pump for about 2500 all up. I still run the rb20 box.

If i were you, i'd consider spending money on suspension and tyres at this point as you already have a fairly nice setup that only really needs an ecu upgrade to give a nice responsive 190rwkw. A stock r33 engine will put you back to the exact same point you are at now with only a bit of bottom end poke added

predator Grand Master

predator

Posted
Posted

yeah, bhdave has a point.. little point doing the swap unless you have everything at a suitable standard. No point running an rb25 with everything else totally stock.

even though I had my rb25 sitting there for a while, it wasn't until I had the full exhaust system, intercooler, some suspension, slightly larger turbo and brake mods in place to bother doing it.

thinh Enthusiast

thinh

Posted
  • Author
Posted

Thanks guys, i really appreciate your comments...

For now i think im gonna stick with the rb20 and improve it.....

Until (if) the motor actually decides to shit itself, then i will think about the conversion cause it's probably not worth fixing somethinmg that aint broke....

Cheers...

P.S still open to any other suggestions that may change my mind!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...