Jump to content
SAU Community

Recommended Posts

I was trying to fit my tomei poncams last night and everything was fine until........

I tried to fit the Cas unit to the front of the exhaust cam, its got a different kind of 'conection'.

Is there a difference between some of the rb25's cas unit? Mine has teeth and one locating lug that sticks out, the cam has two locating lugs...

I live in the uk and bought the cams from nengun so I am going to have to find some way of making them work, even If i have to buy a different Cas unit.

please help, anyone with photos of diffenert cas or cams?

thanks

Tom

Edited by tom200
Link to comment
https://www.sau.com.au/forums/topic/114187-rb25det-tomei-poncams-problem/
Share on other sites

also believe that the base circle is different on them too..

what is the product serial number for the cams you have ?

what is the month and year of your car as well??

pre oct 97 R33's all use the same cam regardless of series.. post oct 97 use the Series 2 option poncam, then r34 is different again.

The month and year of the car is unknown as its in my s13and I forgot he car I got it out of...... oh well...

I do know its a series two, I think it was a 96 or 97.

The cams came in a box that I chucked out, but they were for an r33. Maybe a late on with the r34 cas??

I have spoken to some guys here in the uk and I'm sure I have r34 cams so I'm going to fit r34 cas.

Thanks for the help lads.

Tom

143050

ECR33 Series 2 (RB25DET) - Duration: IN, EX 256 Lift: IN,EX 8.5mm

Thats what its says on the nengun web site.

So if I have these cams and they dont fit???? I must have a series 1 motor? unless thery sent the wrong ones... but i chucked the box now.

How can I tell quickly if i have a series 1?

Can someone post a photo of series 1 and 2 or r34 cas? I just want to know what car has the cas driven by these cams.

thanks

Tom

Edited by tom200
How can I tell quickly if i have a series 1?

Can someone post a photo of series 1 and 2 or r34 cas? I just want to know what car has the cas driven by these cams.

thanks

Tom

If you have a series one you should have a ignitor unit at the end of your coil pack rack at the back of the engine on the black plastic cover. Series 2 25's dont have a seperate ignitor pack.

also the throttle position sensor will look like a single unit on the S1 and look like a double on a series 2 .. but that still doesn't help the fact that a S2 made before oct 97 will still not be able to use these.

I was trying to fit my tomei poncams last night and everything was fine until........

I tried to fit the Cas unit to the front of the exhaust cam, its got a different kind of 'conection'.

Is there a difference between some of the rb25's cas unit? Mine has teeth and one locating lug that sticks out, the cam has two locating lugs...

I live in the uk and bought the cams from nengun so I am going to have to find some way of making them work, even If i have to buy a different Cas unit.

please help, anyone with photos of diffenert cas or cams?

thanks

Tom

get a r34 or my98 onward r33 crank angle sensor. or buy new cams. you can sell your existing crankangle sensor easy enough.

not sure on base circle but

and you need to swap the two triger wires around in the plug.. ie green/yellow green/red i think. the black ones earth the black/white is power

Ok mine is a series 1. it has the ignitor at the back on the top.

I'm thinking these are series 2 cams as I cant see how they woulb send r34 ones and i'm sure the box said r33 rb25det.

Is it ok to swap series1/2 cas. how much are they on here as I only found one tuner over here and they want nerly $1200au . that was for the r34 though.

I still would like to find an image of what cams / cas haved what drive, just to be sure what I have.

If they are 34 cams i'll just sell them.

I quickly made this models up to show what the difference is. If anyone can be sure what the tomei one is for, then please tell me.

My old cams have this to drive the cas - images 1 and 3

the tomei cams have this kind of drive, anyone know what car this is for? - images 2 and 4

-

once again, thanks for the help.

Tom

old tomei old tomei

post-22537-1145536212.jpg

post-22537-1145536237.jpg

post-22537-1145536251.jpg

post-22537-1145536266.jpg

Edited by tom200
  • 3 months later...

I am bumping this thread up because I seem to have the same problem. My motor is a SII rb25det (without ignitor). I just bought some tomei poncams part# 143050 and the cam angle sensor is different. Is it confirmed that I have to get an r34 cas and that it will work with my motor?

-Bluefire

  • 4 years later...

Bump :)

Was this ever resolved? What cams are in the very late S2's with the black CAS? Is it cams from the Neo engine???

According to wiki the RB25DET and Neo cams are different profile:

RB25DET Camshaft duration 240°in, 240°ex lift: 7.8mm in, 7.8mm ex

RB25DET NEO Camshaft duration 236°in, 232°ex lift: 8.4mm in, 8.7mm ex

So Nissan would have either have had to machine a special cam to accept the black CAS, or just take the upcoming Neo cam - when they were building the very late S2's.

Edited by Tony de Wonderful

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...