Jump to content
SAU Community

Recommended Posts

Hi, just wanna know whether a turbo with following spec would be good for my R33 RB25DET:

Compressor wheel major diameter 84

Compressor wheel minor diameter 56.5

exhaust wheel major diameter 73.8

exhaust wheel minor diameter 58

Compressor A/R 0.5

Turbine A/R 0.84

Flange dimensions 86*44.5

lubricant inlet 3/8"

lubricant oulet 2-M8*51

bearing system 2 floating

cooled by oil

My Question:

Would that turbo fit into my std. manifold?

At what rpm would it start to build up boost?

Is it safe to achieve my 500hp at the crank with that turbo?

Link to comment
https://www.sau.com.au/forums/topic/114190-question-for-turbo-gurus/
Share on other sites

without know the flange type you wont know if it will fit.

also what is the dump flange, as it may not suit the stock turbo.

oil cooled only sucks. also not ball bearing sucks.

your standard turbocharger is ball bearing and oil + water cooled.

start to build boost is impossible to say without compressor map or trying the turbo out yourself.

safe to achieve 500hp? not without supporting modifications no

http://www.trademe.co.nz/Browse/Listing.aspx?id=53938423

$750 with 6months warranty.........

how do i differentiate between good/sh!t turbo?

Let me rephrase about the 500hp..... will this turbo be able to handle 500hp? coz it's rated at 650 hp.... forget about all other things for the moment.....

its not worth it IMHO and it will fail sooner or later.

There are far too many average joe turbochargers going around.

Buy a trusted and proven brand/item and it wont fail.

Plus there would be hidden costs associated in bolting that up to the RB25

If someone is asking $750 then you can tell that's not the turbo you want.

Laggy, unresponsive beast only useful on fully built motor with raised redline for drag racing. Or put it on a bigger engine. Needs different manifold and dump as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah been doing it in an x shape. Do you reckon it's worth putting guide coat early where the filler isn't sanded down completely smooth? Reason I ask is because as I'm sanding it one part might be level which I don't need to sand anymore but the other part might be high so I can just focus on that instead of sanding across the whole repair area. I wonder if the putty is too thin, though the area is almost completely smooth before I do it as I've already put filler prior.
    • Just 2, and inline. One switch temp related other switch driver controlled.   I'm nearly in my head back to Arduino land for it...
    • Complex conex, sand in X shape. And don't go hardcore. I find putting on filler to be the art here to help.
    • Hey y'all, I have a completely stock 1991 R32 GTR, yesterday I took my car out and went for about a thirty minute drive. It was fine on the way there but when returning home I think the car might have gone into a limp mode. I was cruising in 5th gear around 130km/h, the hicas light came on and there was a significant loss of power. About a minute later I hear a thump, the car starts driving normal again and is fine the rest of the drive back. This is the second time its happened, same as now it was fine on the trip there. On the way back it had the hicas light on but that time I would feel the power going in and out before hearing the same thump and it being fine.  I have no idea idea what causing this, but if anyone has any ideas it would be great as a start chasing the cause of this. Also I can provide more details if needed. Thank you
    • When sanding across a convex panel, you need to sand, as much as possible, at right angles to the curve. If the panel is compound convex curved (ie curved in both directions) then you are SOL and have to use "craftsmanship" to get it right.
×
×
  • Create New...