Jump to content
SAU Community

Recommended Posts

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

:wave:

its one thing to be a 13 year old keyboard warrior but its another to know better fella's ;)

Im sure that Andrew will post pics of his car collection in all good time!!!

If he doesn't then :wave:

Now cut out the BS post or i'll :dry: the lot of ya for a week :D

GMB

RLOL.

I Didn't say anything to Offend any one Grandmaster B, Was more or less just a ?, As my pairs bought my first car lol, 2002 car cost a fair bit too but since have sold that and gave them the money back that they bought it for and went and bought my Sky.

But yea Andy id like to see some Photos of ya car when you put them up should be Insane!...

Roberto.

how can it be necessary and realistic for a person still at school to own four cars

LIKE I SAID GIVE IT A REST FELLA'S :)

You were all young once FFS give the guy a chance to prove himself ok...

And for the record im only 23 and i have more than 4 cars, a bike and a house and i dont have rich parents that bought any of it for me :thumbsup:

QUOTE(RB20tR32 @ 1 May 2006, 11:11 PM)

how can it be necessary and realistic for a person still at school to own four cars

LIKE I SAID GIVE IT A REST FELLA'S

You were all young once FFS give the guy a chance to prove himself ok...

And for the record im only 23 and i have more than 4 cars, a bike and a house and i dont have rich parents that bought any of it for me

Sorry, Not tryin to bag him out or anything. Im 18 and at one stage I had three cars and that was ridiculous for paying insurance and rego, not to mention unnecessary. i drove one car most of the time (the skyline) and the other two mostly sat around doin nothin

na, matt's is in hobart i'm pretty sure. This blue one has white 5 spokers.

Is your old one the one in the scrolling pics on the streetmachines website (r34 wheels)

Na, that one (was bayside blue) was Jason's old one who now owns the 34, mine was/is blueprint ford colour, BBS LM wheels.

There was some GTR's getting around down there! Saw a really nice silver one near the Silverdome on one afternoon, appeared driven by a "more mature" guy.

:P

post-7861-1146627410.jpg

Yer there's a few GT-R's getting round down here now, I had mine out and about most the the event. I had It parked up a bank 1/2 down cethana, probably don't notice those things when your racing.

Yer there's a few GT-R's getting round down here now, I had mine out and about most the the event. I had It parked up a bank 1/2 down cethana, probably don't notice those things when your racing.

Funnily enough I think I did see you! We were chasing down a white Evo IV at the time. Does that ring a bell?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...