Jump to content
SAU Community

Recommended Posts

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

so what should i do, i'v taken the car back numerous times and it's always the same result, all that happens when i take it back is the tuner just keeps lowering the timing, to me it seems like he just can't be bothered

I might as well get the stock ecu put back in, cause thats what it feels like

Edited by Hulk1010
It really depends where it is knocking.

If it's on over run then not a major concern, or if you are bouncing off the limiter then it isn't uncommon as the pfc cuts fuel creating a lean condition

Fuel cuts aren't a lean condition as all the injectors are shut off. Knocking on the rev limiter is usually from crackshaft harmonics due to the massive rotational decelleration. Find out when the knock occurs and we might be able to help you out more.

Edited by rob82

thanks for the replys

I'ts always before the limiter, at random times, I might give it a boot from 2nd, 3rd, 4th etc and end up getting a high reading, could it be the knock sensor?

a week back i gave it a boot from second and then checked the knock level reading and it read 111, the RPM was 5500

thanks for the replys

I'ts always before the limiter, at random times, I might give it a boot from 2nd, 3rd, 4th etc and end up getting a high reading, could it be the knock sensor?

a week back i gave it a boot from second and then checked the knock level reading and it read 111, the RPM was 5500

By that knock level you should actually start to hear it through the fire wall. Is it a temperature based problem ie does it do it at night on the highway or slow cruising around town in the heat of the day?? If you pull 2 deg out globally does it stll do it??

By that knock level you should actually start to hear it through the fire wall. Is it a temperature based problem ie does it do it at night on the highway or slow cruising around town in the heat of the day?? If you pull 2 deg out globally does it stll do it??

OK - I kind of have this problem too – but not as bad

I have an R32 GTR with Weisco forged pistons - and my knock reading creeps up to the high 50s from time to time. I have also seen bursts up into the 70s but only if I'm using bad fuel.

I have had my engine checked by 3 different tuners - all using head phones to listen for knock - and they all confirm that my engine is NOT knocking

Under the settings menu on your PFC you add advance / retard timing and increase the injector duty cycle across the entire rev range – or 'globally'

I tried taking timing out in steps. I stepped up from -2 / -4 / -8 degrees - and it made no difference to the readings.

I then added more fuel 'globally' - still no difference

I then did some tweaking to both at the same time – still got the same readings (shrugs)

So - I figure I either have a dodgy knock sensor - or just a noisy engine :)

or possibly both

The knock reading can be misleading as ive seen many cars with high readings with no det at all.One GTS read a count of 93 no matter what you did, we even backed the CAS off asd far as it could go and retarded timing with the PFC with no change,even changing the knock sensors did nothing.Use the reading as a guide only but its no where near perfect so us other means as a back up if your not sure.

A maximum power tune will give readings in the 50s also,this is why i like to use other tools for det detection on the dyno on hi powered cars.

Does it do it all the the time?

Every now and then I'll get really high readings,spoke to the tuner and he mentioned it could be the fuel pump.

I've just replaced it and its still playing funny buggers, highest knock of 120 when overtaking in fifth gear with less than 3 qtr throttle.

All other times sits on mid to low 30's!

same boat **raises hand.

Mine has hit a max of 84, but after a bit of driving in low and high revs the knocking is down to lower than ~30. Is this a problem at all?. If I am driving with no hard boosting the knocking is lower than 20....

Also have been told to watch for blowing smoke.

White = water

Brownish = fuel

Black = oil

is that right?

I've put about 6,000km on my GTR in the past 4mths driving in conditions from 5c-44c on 0.8-1.4bar and never have I seen my knock level go above 32.

Maybe it is time for you to find a different tuner Hulk.

I have the same problem with my gtstr33. it spikes upwards of 120 with the aircon on, and up around 50-60 with aircon off. It happens at around 4500-5000 rpm.

I have my map locked so i cant take out any timing to do some fault finding. This is quite annoying seeing the engine check light flash rapidly at me. I hate the thought of slowly killing my engine.

I had mine tuned at one of the best tuners in sydney and it was not detonating on the dyno. I even took it back for them to play with and they did take some timing out. I am wondering if its possible for the car to be using different load points under wot on the dyno to wot on the road. In this case that part of the map may not be tuned????

Does any one else notice a rise in knock if the aircon is on???

^ The engine is working harder with the aircon on... so its gonna show up.

Take it back to this "one of the best tuners" and tell them its still happening. Sacrafice a little bit of power for the overall health of your engine...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That R31 was so cool. Only did Orange Park once. Scared the hell out of me.
    • Selling my TE37SLs since I've switched to smaller wheels.  They're for sale in Japan but it's pretty simple to send them overseas; USA excluded, since JPPost isn't sending there at the moment. Specs Front: 18x9.5j +22 5x114 Rear: 18x10j +20 5x114 Price: 320,000 JPY/ 3,285 AUD (current FX rate) Condition: a few scratches here and there, no bends, distortions or cracks.  Tires will not be included for international buyers, I'll get them dismounted before shipping. They're currently listed on yahoo auction and will be shipped in Japan with the tires if they sell here. Shipping costs to Aus: EMS (1-2 weeks): AUD 1,175 (current FX rate) Sea (2 months): AUD 460  (current FX rate)
    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
×
×
  • Create New...