Jump to content
SAU Community

Recommended Posts

Hey Guys,

I wanted to know is it possible to get a 2 piece caliper/2 piston with a sliding plate system setup for a R33 GTST. I currently have the standard calipers for a R33 GTST which most of you are aware is a 1 piece caliper with 4 pistons.

Any feed back would great.

Cheers

Babylon.

you would have to use the smaller disc but

orrr use v35 skyline gt brakes (the povo version/non brembo) im pretty sure they are a 298mm disc so the calipers should bolt up

i dont want to change my disc's if i dont need to the issue is i want to change my standard calipers to a 2 piston setup and not lose any braking power just wanted to know if that was possible.

WHY? what is wrong with the 4 piston ones you have? moving to a sliding caliper is a bad move.

Beer Baron that’s exactly what i think

The reason i ask guys is that my Break Squeaking issue has come up again.. and ive taken the car to 2 brake\clutch specialist

http://www.skylinesaustralia.com/forums/in...topic=73439&hl=

1st has advised that i need to replace my discs but cant guarantee the noise will go away and to be honest I don’t want to spend $800 on a issue that “may solve the problem”.

2nd has advised Slotted Discs will not solve the issue. Noise might get even worse.

My uncle the mechanic who is helping me with this has different opinions he believes its the callipers that are causing this issue he wants to see if I can get different system to the standard one Basically im trying to prove him wrong.

What state are you in. The Nissan 4 pot caliper is superior to any twin piston sliding caliper, dotn even think about it, it will be expensive and a drop in brake performance.

Next move is go to another brake place. If the rotors are true and above thickness then leave them be. Any brake guy worth his mustard will get rid of the squeel for far less then what you have quoted for replacement rotors...it shoudlnt be difficult...just need an experience brake guy to spend the 60 mins to fix your problem

Let's see, there are around 4,000 Skylines in Australia and over 2 million in Japan with this style of calliper. Miraculously you are the ONE with brake squeel that can't be fixed.

I don't think so Tim.

:) cheers :O

Correct me if I'm wrong on this, people, but this is my understanding:

The whole reason for using more pistons in a caliper is to get more braking force through greater surface coverage when you apply the anchors, more friction, and (as a by-product) more heat transfer.

Reducing the number of pistons acting on your brake pads means less even wear of the pads, and most probably the discs, as well as more potential for disc warping (depending on the size of the pads in relation to the pistons).

Thanks guys that’s exactly what i assumed i told my uncle that im down grading my brakes by doing that

i just needed a confirmation.... im in Sydney West.. im just going to take the car to another Brake place someone that is actually willing to put time into the problem (any recommendations?)

Thanks again

Babylon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • Just planning to have the wiring neat and hide as much as possible.
    • The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...