Jump to content
SAU Community

Recommended Posts

Just posting this up for Ben. Apparently was tuned today at CRD, on pulp and ~20psi made 394awkw. Full boost is late 5000ish rpm. Street exhaust, no playing with cam gears yet, more to come later. Will be at the Sports Compact event next month at WSID.

post-4735-1146302690.jpg

post-4735-1146302730.jpg

post-4735-1146302746.jpg

post-4735-1146302757.jpg

post-4735-1146302769.jpg

post-4735-1146302780.jpg

Link to comment
https://www.sau.com.au/forums/topic/115457-600hps-new-rb26-setup/
Share on other sites

The car is still a 2.6L with tomei 260deg cams

and forged stuff inside.

The car made the power running a trust street exhaust wich is 3" piping with a 70mm muffler.

also the was running 22psi on optimax.

Last time when we put on our 4" race exhaust we made another 30KW at the wheels, so we'll see how it goes later with that on.

Jim did a great job tuning the car.

The car will be at the track for compact attack but currently the car will not be running as we can't afford a new gearbox just yet.

Thanks to the guys down at Hypertune for doing all the work on the car and installing the new plenum and throttle body.

Edited by 600hp
Jim did a great job tuning the car.

The car will be at the track for compact attack but currently the car will not be running as we can't afford a new gearbox just yet.

looking good Ben, we just missed you at CRD.

The T88 is a 33D wich is the smallest T88 they have made and is no longer available.

why not the T88GK, because the GK is rated at 1100hp where as the 33D is rated at 850hp.

The car is very nice to drive arounf the streets.

it makes about 120AWKW before it comes on hard. a stock GTR makes 160AWKW.

The turbo looks like it should make 500 with some other little things added.

as for the bleeder system was done by Hypertune.

No there isn't a V-band flange on the turbine housing.

The car is now an absolute freak to drive now!

Freak as in all or nothing?

Nice to drive around the streets as in off boost or do you always drive around the streets above 6000rpm?

The plenum looks like it makes it more laggy as the lack of midrange is bordering on a joke? BRING BACK THE JUN PLENUM

All up very nice for drags shame you wont run it as plenty of GTR's run 10's with stock gearbox

Edited by SPY
All up very nice for drags shame you wont run it as plenty of GTR's run 10's with stock gearbox

They don't for long though......Nissan 3rd gear + high rpm quick shift = BANG

There are not too many 10 sec cars running stock boxes....Not in Australia anyway. Theo broke 13 boxes to get his 10.78.

Edited by DiRTgarage
The plenum looks like it makes it more laggy as the lack of midrange is bordering on a joke? BRING BACK THE JUN PLENUM

Lets not be too critical fo the setup...it is running a 3" exhaust, and it sounds like the tune still has to be fiddled...which if he is goign to be running the race exhaust at the drags and it makes more boost and power as a result of lower back pressure then it makes sense not to spend too much money on a tune for its street setup

Can you tell me what you have done with the air bleeding setup to the header tank?, ity looks interesting, and im curious to what you have done

thats the secret cooling system mod that gtr700 had blacked out in all his photos of his engine.(apart from the extra top radiator hose of the header tank.)

you cant run it like that if your keeping the standard six throttle setup. as it removes the vacume chamber/balance chamber from the inlet.

ie: no vacume take off points.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...