Jump to content
SAU Community

Recommended Posts

I was just wondering if fatz or other r31 friendly people could give me some advice on something.

I currently have an r33 with a range of mild mods. It drifts pretty well, but i'm just really too scared to bend it.

I was hoping to pick up an r31 to take over the drift duties. If I bent the 31 or smashed it, or whatever, it would be fine. Just bang the panels back out with a hammer, gaffa tape fix, whatever.

Does the stock rb30 powered aussie 31 drift alright?

Anything I should be on the look out for apart from an lsd, which is of course important?

Can the stock lsd be welded?

What mods from the nissan range e.g. 32s, 33s, s13s etc can be bolted straight in or with minimal mods (I was thinking more along the lines of suspension components etc?

Does anyone actually have one for sale? I'm talking cheap like around 1k, which won't die on me, and which may have some stuff on it already like new clutch etc.

Cheers fellars

32s are way over priced for what they are. To get a decent 32, that is, one that won't blow up, i'd probably have to pay around 11-12k. Then I still end up only having a stock way underpowered and undertorqued car. It would still have boat suspensions and everything.

If I was going to pay aroudn that price, i'd just pick up another 33 for around 13-14k instead. The rb25 would be much more appropriate.

That's why I was looking for a 31. I've read various posts from fatz and other knowledgeable people :/ in the past before.

Starting with the stock rb30, which has quite a bit of torque and power. Then welding the diff.....

Aussie ones don't have IRS, the suspension is pretty crap on them, the RB30 is OK I guess but pretty gutless in my opinion. Not an ideal candidate as a drift car. The Jap spec ones on the other hand have a bit more potential (specifically the coupes)

R32 is a whole different (and better) world worth every cent over a aussie R31.....

You won't find jack shit for $1k either btw.

Why don't you just get out to a skid pan day in the R33, your chances are very slim to none of bending the car if you don't act like a wanker. Very hard to do damage to your car unless you're trying hard to over do it. Helps you get a feel for the car and will let you learn how to control it.

Edited by d0p3y

mate and RB30 is hardly powerful next to an RB20DET. plus you will be hard pressed to find a manual with LSD for $1K. you can do it, but it will be so far from track worthy it's not funny.

hahaha fatz knowledgable! next someone will say dirt garage is a nice bloke :ban:

I've got no idea aout r31s, except that if you don't mind a locked diff don't worry about a 20yo LSD....just weld up the centre of the axle instead :D

mate r31 is great choice for thrashing

1stly as you said you can smash it and bash it out with a hammer

2ndly you get plenty of women...

locked diff in a r31 is a winner. yes it does not have irs but thats also the advantage to having live axle locked up with rb30e. slides so easily.

as for your question : "Does the stock rb30 powered aussie 31 drift alright?"

look here for your answer

The.Choko.Durrie.MotorSport.R31.DriftLand.tn.jpg

http://kero.drifthost.com/videos/marks4doo...1.DriftLand.wmv - 8.2 meg from very quick server

that's pete (fatz) driving my r31. stock rb30e engine, shitty 2 1/4" tip. and diff locked up. suspension was very very very used koni shocks which were in their 4th car by the time they made it into my car. not bad for a stocker me thinks.

ScreenShotSmall.jpg

also here are some in car videos of the car being drifted at wakefield.

http://kero.drifthost.com/videos/marks4doo...eld.Park.01.wmv

http://kero.drifthost.com/videos/marks4doo...eld.Park.02.wmv

http://kero.drifthost.com/videos/marks4doo...eld.Park.03.wmv (once again all hosted on very quick server)

and this video will give u idea of how much an rb30e can take - about 4+ minutes sitting on the brakes in 1st gear ripping a burnout at wsid (shithouse burnout in the end i know!!)

http://kero.drifthost.com/videos/Mark.D.Th...ws.Radiator.wmv

i still own this car. it is a 1988 R31 Silhouette. From the outside, the only mods I have done are Series 3 conversion (means round taillights at rear, and sloped headlights at front with different grille, bumper and bonnet). and it IS FOR SALE. it has had the rb30det taken out of it (putting it into my old hr31 coupe).

x1pmAkndzHuOfeimqvHaMsWcC-5M6sKqP2g.jpg

inside it has full 6 point roll cage and stripped interior. roll cage has since been painted black so that it's not visible from outside. roll cage has made the car stiff which is a winner for the track - rigidity of it plus the locked diff makes it go around corners a dream.

pics below of cage (note - doors have trims on them now) - pics are of when car got stuff installed hence messy in pics.

DSC05138.jpg

DSC05139.jpg

DSC05140.jpg

DSC05144.jpg

DSC05143.jpg

cage was designed so u can fit wheels in the back seat still.

looks plain on outside so you never attract any interest. but good on inside. very light.

car comes with some wheels and tyres. about 12-16 in fact. sets or pairs.

heres's some of em

hkhkh.jpg

to make car handle even better you simply install s13 struts and control arm into front. you can then go s13 coilovers in front if you so desire. they also fit in rear too. other shit can be bolted in also etc.

anyway thats about all for now. car is nsw registered. rego until 31/07/06. if interested let me know.

cheers, mark

Aussie ones don't have IRS, the suspension is pretty crap on them, the RB30 is OK I guess but pretty gutless in my opinion. Not an ideal candidate as a drift car. The Jap spec ones on the other hand have a bit more potential (specifically the coupes)

R32 is a whole different (and better) world worth every cent over a aussie R31.....

You won't find jack shit for $1k either btw.

Why don't you just get out to a skid pan day in the R33, your chances are very slim to none of bending the car if you don't act like a wanker. Very hard to do damage to your car unless you're trying hard to over do it. Helps you get a feel for the car and will let you learn how to control it.

I've had my car out at skiddies, and oran part north circuit a few times. It goes alright considering it only has the stock Vspec diff and no mech diff.

I'm just too worried about bending panels, especially at OP. I'm too worried to commit enough into the drift and too worried to drift at higher speeds etc. It's pretty scary when you spin out too, because i find that people drive pretty close together. There ahve been a few occassions where the person behind has almost hit me after I spun out

Edited by 97r33gtst-typeM

88, thanks for the offer mate, but a cage is a bit too hardcore for me. I was sorta looking for somethign that the cops won't hassle me about. e.g. after welding the diff, I might need to test it (on private roads) etc.

Is it possible to weld a diff if it isn't an lsd?

seriously if you want to do some drift or circuit in a cheap 31 then marks car is the go. it already has some cash thrown at it to make it the best little 31 it can be. it has full cams approved (i think) roll cage which would make a huge difference to the way it handles. plus comes with heaps of rims and tyres, and a welded diff. what more could you ask for.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...