Jump to content
SAU Community

Recommended Posts

Just wondering if anybody here races go karts?

I'd love to race cars but that's too expensive so go karts are the next best thing (& seems the base point for most race drivers)

If anybody has any information they can pass onto me would be great.

Price range of karts (a good starting race kart)

Typical maintenance costs

Licenses, costs.

Good web site resources?

Thanks, :woot:

Edited by geno8r
Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/
Share on other sites

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I haven't had any first hand experience but have a few friends that have raced competetively! From what i've been told, it is relatively cheap to gets started but it's the maintainance that kills you! As they are so evenly powered any advantage you can get is vital. But advantages usually come with a price tag. For example, I've been told that if you want to run at the top consistantly you at least have to have a new set of tyres each round and don't think because they small they're any less expensive! So it can get costly, no where near a car mind you.

But they also said if you just want to get out there for some fun wheel to wheel action and aren't conserned with being the next lowndesy, it can be an economical and extremely fun form of motorsport!

I'd love to get into it but as I posted before, I'm tall and heavy so I already have an anoying disadvantage.

Little buggers zipping past me on the straights :woot:

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2162399
Share on other sites

i used to race karts. you can heaps of fun for about $3000. buy a 2nd hand kart and racing gear and get into it. i cant remember how much a club licence/membership is, but it ain't cheap, and you've also got to do some marshalling too. but its all worth it.

if you want to be competitive, then you've got to start spending big dollars and take the time to test and configure your kart to each circuit you race at. tyres, engine rebuilds (after about every 12hrs worth of use!) and basically not stingeing on anything which you might have in the past.....

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2169700
Share on other sites

My mate has raced Karts for about 4-5 years now, I am his pit crew. He used to race sprint Karts(kart below without the big nose cone) the engine was a 100cc Clubman. There is a few engines you can get ranging from size and power, they start from a J to a Clubman to a Rotax125cc clutch or a Leopard. J's and Clubman's are clutchless whereas the others have got clutches. Sprint racing is fun but VERY compeditive, eespecially with the younger guys coming up from juniors. We have stopped racing Sprint and now running a Superkart(pictured below with big nose). Superkarts are run on normal sized tracks, we only run on Mallala over here, but over in Vic i think there is at least Winton and Phillip Island. Superkarts have different classes also they are 80cc G/Box, Rotax 125MAX non G/box(which is what we run), 125cc G/Box and 250cc Internationals(G/Box and faster than V8 Superkart.......No S$#T) We run the 125MAX over here because we get fields of at least 25-30 if not more and it's fun to race.......especially slip streaming!

Below are a few websites i can think of

http://www.kartsportnews.com.au/

Adelaide Superkart Club(just for some info.....obviously your not in SA)

http://www.superkart.net.au/site/index.php

And also i have put in our sponsors Kart Shop Website

http://www.iwt.com.au/default.htm

Sprint Kart

Superkart

My mate in the thick of it at Mt Gambier

My mate has his Sprint Kart up for sale on IWT website.......just a quick plug for it.....LOL

Hope you find all the relative links and information you need and good luck on what you decide!

Darren

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2173220
Share on other sites

  • 3 weeks later...

ive raced competitvely now for around 3 years and find it alot of fun however i know some ppl say its cheap but if u want to race competitvely it can hurt ur pocket iv placed top 10 in nationals 05 n top 5 most wa states for a brand new kart and motor ur looking at around 6 grand 2nd hand u can pick one up for around 2.8-3.5 iv learnt alot of my driving skills from racing karts and intend to race more however very keen to move up to formula fords or saloon cars

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2223488
Share on other sites

i reckon if your just after a cheap thrill every now and then, go to a hire go-kart place. they are expensive, but some of them are actually really close to being "race karts".....

but hey, dont let me talk you out of it. i had a blast when i was doing it....

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2224628
Share on other sites

Guest Mashrock

you can find alot of karts on ebay for under 3000. which seem pretty good.

the local karting track should only cost you 20 or so bucks fro a day or so. or maybe only a yearly membership??

and you supply the rest. fuel etc etc.

i beleive thats how it goes in sydney at picton track.

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2233240
Share on other sites

I used to race karts a few years ago.

If you are self employed contracting in a physical trade be careful. I broke my hand racing and was out of work for 8 weeks. So it was indirectly very expensive.

I think you need to set a budget for the year and stick to it.

Set up:$5500-$7500 for kart, trailer,suit,wet's,slicks,tools,license,spare engine depending on class.

Running for the year:Anywhere from $1000 up. You could spend $1000 testing and practice and $1000 on select events for the year depending on what you are after.

Another option is running in endurance series. The endurance association lease karts to teams who want to arrive and drive. I thinks it starts around $600 for the team to run in a 6 hr race so it can be cost effective( great idea for skylines australia punters).

Hope it helps a bit

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2233413
Share on other sites

make your own

steal your old mans law mower and get a few mates around with some slabs and a welder.

If your reaonably clued on it can be done without massive expense.

Under $1000 i reckon at the worst

Guy i grew up with had 2 home-made go-karts, top fun.

His old man was the first Top Fuel Drag bike to crack a 6.99 back in the 90's aswell.

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2233941
Share on other sites

  • 2 weeks later...

I use to race. It was the best fun eva!!!! The club i joined gave you a key to the track when u pay membership which was about $110. Liscence around $280?? Bought my kart off a guy who is now racing formula ford for $1800 with a suit, helmet boots etc. Bought trailer for just over a grand. I was racing Senior National lights, (a J motor 100cc) Wasnt as fast as other classes but just as fun! A set of tyres lasted me a whole season which was pretty good. Race entry was about $50. The money is deffinately worth it!!

Due to lack of funds and time i also have my set up for sale!!

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2260231
Share on other sites

i'm also thinking of gettin a kart, what should one look for when purchasing a 2nd hand kart, in terms of engine life etc.

and what tools etc woudl one need to mantain the kart?

n ofcourse how fast do theses things go? never been in one sorry :unsure:

Edited by Suspense
Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2264436
Share on other sites

When i first started i got by with chain lube, tyre pressure gauge(theres usually a compressor at the track), Hex key set (allen keys), Spark plug spanner, and normal set of spanners or ratchet, measuring tape for track of rear wheels. Then just oil and fuel to mix. I think thats about it! When looking at karts look for cracks in the frame, particularly under the seat or dodgey looking/flaking paintwork.

Most karters rebuild their engines fairly regularly, so check when last rebuild was done, and see if carbies clean and fuel filter used etc..

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2264471
Share on other sites

Not sure what sprint karting is like in the eastern states, but over here after we had the Nationals over here this year it has turned out sh!t, not as many people out anymore, this is why we went to superkarting at the start of last year. After this year we will be moving on again to finnaly race in Improved Production in the car we have been building for a couple of years now!

I would assume over east you guys still get a good represent at sprint meetings tho!

Get into it.....it's great fun, just steer clear of the young kids with fathers that are wankers and you'll be all good, just need to tell them that you race for FUN and don't care if you punt thier young wanna be race car driver off!!!!

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2270484
Share on other sites

If you are really keen you want to look at a 2nd hand rotax max. You can pick karts up to suit what ever standard of racing or a just as a social type of enjoyment.

I currently have 2 karts that i use here in Dubai and i was lucky enough to win the national championship here last year and attend the rotax world champion ship.

If you are going to get a 2nd hand kart a simple test to see if the frame is not twisted or bent is to turn the steering wheel from lock to lock and make sure that the outside wheel comes of the ground about the same distance when you turn from lock to lock. It should pick up either front wheel when this is done, if not then leave it alone you are buying trouble.

Also these days the rotax is the most popular class and they have different weight classes so there is something for everyone. Its a lot of fun but be careful as it is adictive ( highly ) All rotax which are being raced should come with a seal and from this seal you should be able to inquire how many hours of running has the piston done and bottom end for that matter. Ask for the contact details of the engine builder and talk to him they will get you onside quickly.

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2287525
Share on other sites

Im looking to get into karting now. Just starting the trail of getting it all organising.

I guess a kart would be a good start. Not looking to be competitive, but to just get out and have some fun. The track here isnt of a very good standard so it looks of more a social affair, which is fine with me.

Looking to go racing Senior National lights class as well I believe it is. Seemed to be about of field of about 6 people in that one when I went out for a look around the other day.

I just think it might get expensive quickly. Just gotta find a semi decent kart first, i have a few numbers of a few shops so that will be the first point of call i reckon.

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2304605
Share on other sites

Just got back into racing karts after a year off and missed every moment of it.....If you are considering getting into it then check out the local tracks and see what the biggest classes are ( usually rotax, clubman or J's) Be wary that with a rotax you need to upgrade to a B grade license b4 you can start from the front of the grid. They usually put C graders and P platers to the rear, this is why a Clubman would be a good start. Don't expect to fast straight away as there is more to setup with chassis than you may think....the first year is usally just for learning :blink: Re. Turbo tim....where are you located? cause if you are in sydney i can hook you up with a kart dealer to talk to. :)

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2304669
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...