Jump to content
SAU Community

Recommended Posts

can anyone tell me if the where one might find a set of these glass headlights for the R33? i'm sure we're all in the same boat with the discolouration of the plastic headlights on the R33. are they an aftermarket thing? or are they from the S2? if so, do they fit a S1? all info appreciated.

*updated* actually, i've just found out that apparently the series 3 GTR had a glass headlight assembly. does anyone know more info on this?

Edited by vannic
Link to comment
https://www.sau.com.au/forums/topic/117625-r33-glass-headlights/
Share on other sites

yup no glass headlights.. its dangerous having glass anyways.. In terms of safety!! (this is what i have heard and is probably true)

Now you can get those glass cleaner thingys for 20bucks, but takes a lot of effort to make it all shiny and back to normal.

Justjap apparently sell them..

Also wondered why it happens, and its only one side and not both?? anyone know?

I can clean the outside no problem, but the inside is starting to get that yellow haze everyone bitches about.

Apparently you can pry the headlights open by putting them in the oven & separating the parts when the glue melts, but there's no way I trust myself to do that. Might get them cleaned professionally later down the track.

Have you tried a Nissan Dealership that sales import parts. On previous occations i found new parts CHEAPER than second hand parts :P

that's true. my local nissan dealer (ferntree gully) deals in import parts which completely surprised me. however, i think a new headlight assembly would be big $$$. might be worth asking tho.

Car Toys offers a Headlight Treatment for $99 a Pair.

Tell them Dale from PSI Parts sent you.

Here is the description of there service.

Most cars these days use plastic headlights that eventually discolour with use and UV from the sun. Japanese imports such as Nissan Skylines & Silvias, Toyota Supras & Soarers are often particularly discoloured, affecting light performance. Our 'rejuvenating Process' brings them up almost like new, and the ultragloss coating adds protection for the future, with greatl improved optical clarity.
  • 2 weeks later...
that's true. my local nissan dealer (ferntree gully) deals in import parts which completely surprised me. however, i think a new headlight assembly would be big $$$. might be worth asking tho.

$560 per assmbly!! just look at my avatar mmm nice clean lights haha

try adding some car wax/polish on them a few times, i did this with mine and i noticed them go really clear.. make sure you wash them on the outside before adding the polish.. this will shine them up(give them a clear look), but wont affect the discolouration from the inside..

Edited by MKDR33

well my mate brought a sedan and has stained covers, very simple to fix, follow this procedure.

1. Buy a Automotive body cutting compound. The stuff you use as a first polish on a car after a new paintjob, it is quite corse and green. Apply to rug and polish the plastic. Do this by hand, or with a non-rotating buffer. A rotating buffer tends to swirl to much. Once the polish is dry buff off.

2. Get some normal cut and polish, form autobarn, cheep stuff is ok. Apply and buff and polish as per normal. Do this twice, possibly 3 times.

3. Get some GLASS POLISH, it is used for polishing windows. Autobarn has this. Apply as per instruction. Depending on how well step 2 worked, you may only need to do this once.

I have no pics but my mate was stocked and the covers look like new and very shinny.

PS. I take no responsability if somone stuffs one up, but i has worked for us.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...