Jump to content
SAU Community

Recommended Posts

hey all,

long time owner, new time driver >_< - so just making sure my car is going ok and everything...

Just wondering what other manual, turbo, R34 owners cars are revving at when doing 100kph?

My car seems to be around 2700 - 2800rpm, more 2800rpm... i thought it was a little high??

No modifications at all except splitfire coilpacks...

is this a normal rpm for 100kph?

cheers,

daniel

Link to comment
https://www.sau.com.au/forums/topic/117777-r34-owners-what-rpm-at-100kmh/
Share on other sites

hey all,

long time owner, new time driver >_< - so just making sure my car is going ok and everything...

Just wondering what other manual, turbo, R34 owners cars are revving at when doing 100kph?

My car seems to be around 2700 - 2800rpm, more 2800rpm... i thought it was a little high??

No modifications at all except splitfire coilpacks...

is this a normal rpm for 100kph?

cheers,

daniel

that's about right. i've got an r34 gt-t with no mods.

nah man, this is 2nd gear.... my car go do 350km/hr!

yeah, yeah, 5th gear.... thought it was a little high that's all, 2800rpm..

and on that token... is it silly to use 5th gear when doing 60kph? i'm thinking purely from a fuel economy point of view. in that the less the rpm, the less petrol being used? But wasn't sure how good it was to drive at 60kph in 5th, at about 1700-1800 rpm

I read something today about fuel economy. They recon moving to a higher gear as early as possible, and 5th in 60 should be ok. But then its all about gear ratios i guess, so it changes on a vehicle to vehicle basis. I guess.

my mates 34 revs at just under 3k from memory too, which i thought seemed a little high too, but i guess not. 5th at 60km/hr might even be worse for fuel econemy, if you've only got very light throttle, then ok, but even on a slight uphill, or accelerating from 60km/hr, then there'd be so much load that you'd use heaps of fuel, where as downshifting and revving a little bit harder while ur closer to the meat of the torqu curve, u will use less fuel. thats the theory side of it that i was taught, probly all a load of sh*t tho lol :D

Mines auto R33 and I find that when the car has not warmed up properly it sits on around 2900-3000 RPM, once it has warmed up it drops to as far as 2,600 RPM.

The revs drop when the torque converter locks up. When driving an auto you should try and notice when the converter locks unlocks and attempt to drive with the converter locked as often as possible, this will lead to very good economy.

Edited by DennisRB30
  • 2 weeks later...
I read something today about fuel economy. They recon moving to a higher gear as early as possible, and 5th in 60 should be ok. But then its all about gear ratios i guess, so it changes on a vehicle to vehicle basis. I guess.

better fuel economy in 5th unless u are trying to accelerate or goin uphill.. :D

i only sift up to 5th wen im going 80......i woulda thought 5th gear in 60 puts to much wait on the car.......what revs does it sit on when going 60 in 5th?

these are my shists

2nd at 20kph

3rd at 40kph

4th at 60

5th at 80

thats for cruising.....

we all know what we go up to in other occasions hahaha

Edited by anjoO

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...