Jump to content
SAU Community

Recommended Posts

when i got my gtr the clock didnt work but didnt worry me, and my head light switch s##t it self and got one on ebay and come with dash surround with clock so i chucked it in and works fine, i have heard they are just cheap

Cheers Chris, I've just replaced my headlight switch so perhaps I should give my clock another go.

I did a search on clocks and turned up this post: http://www.skylinesaustralia.com/forums/in...=3723&hl=clock#

The author mentions something about the power for the clock running from the headunit power?

My headunit is aftermarket. What about you Matt and Steve?

Food for thought, hopefully have time to have a look tomorrow.

Yeah, mine is an aftermarket JVC head deck.

You reckon the installer might of unplugged the clock and not reconnected it.

Could be a good guess.

I tried those 2 fuses marked "Electronic Parts", buggered if i know what they do, installing and removeing a fuse did nothing, as far as i could tell!!LOL!!!

  • 3 weeks later...
  • 4 weeks later...
the clock should have 4 wires going into it, earth, constant 12v, ignition, and illumation.

both the ingtion and constant 12v wires should be on fuses.

I just took a look at the clock.

I have 12.20V constant and 12.20V ignition. I have tried two clocks and I'm stumped.

Next I'll pull the clock apart and see what I can see. Maybe, just maybe I have two dead clocks...?

The clock only fails when the boost has been raised above factory levels. The sneaky Nissan engineers cleverly designed the clock to fail when the AFM voltage exceeded a certain level. When the owners complained of the clock not working, the Nissan dealers simply plugged in the Consult diagnostics tool and noted that the boost level was excessive. This then gave them the evidence needed to refuse engine warranty claims later on.

Or on second thoughts.........maybe the clocks are just cheap pieces of crap.

The clock only fails when the boost has been raised above factory levels. The sneaky Nissan engineers cleverly designed the clock to fail when the AFM voltage exceeded a certain level. When the owners complained of the clock not working, the Nissan dealers simply plugged in the Consult diagnostics tool and noted that the boost level was excessive. This then gave them the evidence needed to refuse engine warranty claims later on.

Or on second thoughts.........maybe the clocks are just cheap pieces of crap.

My car was dyno'd and displayed 12psi. It is a stock ECU with stock turbos and stock AFMs. I thought that was about right? Hrmmm. The highest I've seen my AFM voltage is in the vicinity of 3V - I thought they max out at 5V...?

I appreciate your post Gav but I'm not sure as I've not seen how to use Consult to check the boost level. Which Consult program are you using? I've used different laptop and PDA software and haven't come across boost.

Do you remember your info source please? I'm keen to learn more.

Cheers!

My car was dyno'd and displayed 12psi. It is a stock ECU with stock turbos and stock AFMs. I thought that was about right? Hrmmm. The highest I've seen my AFM voltage is in the vicinity of 3V - I thought they max out at 5V...?

I appreciate your post Gav but I'm not sure as I've not seen how to use Consult to check the boost level. Which Consult program are you using? I've used different laptop and PDA software and haven't come across boost.

Do you remember your info source please? I'm keen to learn more.

Cheers!

Sorry - just me being obtuse and starting another "conspiracy theory"

Definately just a poor quality clock - probably as a result of going way over budget on the development of the GT-R and the production budget had probably dried up by the time they got to finishing bits like the clock.

  • 3 months later...

well i have noticed that as i increase launch rpm my clock reads 00:03, 00:02, 00:01 then 00:60... also when chicks with ample rack walk past it often switching into a flashing mode where it flashes 80:08 on and off until they are out of sight?! other than that it works fine. in fact both my 32 clocks work fine. praise the son of rajab!

Yeah mine clock also does not work when I got the car.

I took the dash off once to fix my speedo cable and when I plugged everything back the clock came back. but after a few days it dissapeared again.

Hope you guys can find out the cause of it and I'll give it a try again. GL

  • 7 months later...

Mine's never worked and was led to believe that it was a common occurence. I started the thread linked to above (http://www.skylinesaustralia.com/forums/index.php?showtopic=3723), but nothing ever came of that thread :woot:

I would love to have a clock in the car; I'm getting sick of looking at my mobile for the time...

  • 1 year later...
Mine's never worked and was led to believe that it was a common occurence. I started the thread linked to above (http://www.skylinesaustralia.com/forums/index.php?showtopic=3723), but nothing ever came of that thread :P

I would love to have a clock in the car; I'm getting sick of looking at my mobile for the time...

I agree, totally sick of not having a clock and there is no way im buying a nasty stick-anywhere clock. It would be dynamite if there was a smick looking aftermarket clock that fit nicely into the origional opening. Wishful thinking, hopefully someone comes up with something :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...