Jump to content
SAU Community

Recommended Posts

baboo - "RB26 composite exhaust gaskets - brand new $50"

which ones?

- the 5-bolt rear gaskets or manifold to turbo gasket?

- all for $50?

- who are they made by?

thank you :D

  • 2 weeks later...
  • 2 months later...

Are the Turbos still for sale ? Brad

Due to some upgrades, I have some surplus BNR34 parts for sale. all item is off an 2000 BNR34 vspec with 30000km.

1. 2 X BNR34 vspec stock turbos - running take offs, had stock boost all their life, excellent condition. $900 for a pair or 500 each ono.

2. BNR34 stock intercooler - excellent condition, support upto 600hp $500.

3. BNR34 stock intake plenum - excellent condition, $SOLD

4. BNR34 stock Vspec suspension - 30000km, excellent, fit R33/R34 gtr $500.

5. BNR34 stock rear lights - excellent condition, $300 for a pair

6. Stock RB26 fuel rail - excellent, $60

OEM RB25/RB26 timing belt - brand new, $75

Few gaskets for sale

HKS metal exhaust manifold gasket RB26 - brand new $SOLD

Permaseal RB26 composite head gasket - brand new $100

Permaseal RB26 composite exhaust manifold gaskets - brand new $50 a pair

also have various OEM nissan / Permaseal intake gaskets for sale.

Please PM me or email to [email protected] if interested.

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
    • Yeah, Duncan is helping sell me back to Android devices. I've hated the whole Android head units due to their speed issues. Even in my old Hyundai Kona (2022 model), it behind the scenes was Android, and slow and shitty to start up. Once running wasn't bad, but still a good 15 to 30 seconds.
    • My roof rails are off atm on the E39 until the rust is fixed. I did find another little bit of surface rust under the rails when I took them off. As @soviet_merlin said I'd just leave them alone unless you're planning on ensuring they're properly sealed. I was on the fence about leaving them off as the delete is still a thing in BMW E39's but I feel like the car is missing something (er, it is, der) with them off and I'm looking forward to putting them back on.
×
×
  • Create New...