Jump to content
SAU Community

Recommended Posts

I have a Cefiro, that has had a 5 Speed manual conversion... Still an RB20DET engine.

I'm trying to figure out what gearbox it has, eg: R32GTS(-T -R), R33 GTS(-T)? My question is there anyway to identify which type of car each specific gearbox came from from the above example? EG: model/part number on the gearbox or similar...???? Clutch may need replacement so, kinda need to know :P

Kind Regards.

Link to comment
https://www.sau.com.au/forums/topic/118104-identifying-codes-on-gearbox/
Share on other sites

for r31/r32/a31/z31 rb20 boxes, RP71C is the model and next to that is either #1 or #2 which denote either single or double syncros, generally double syncros are only in the turbo variants... the ribs on the gearbox casings I have found don't always match if its a turbo or not as I've pulled a few ribbed boxes from N/A vl commodores and they look identical to an import turbo box, but they arent the same.

easiest give away with your car quikblade, would be to check the box cross member, pretty sure an a31 manual cross member will bolt straight up to the body of and a31 auto cefiro, if its got a modified crossmember then its likely its a 25 box cos they're longer (just) than the 20 box!

Edited by frigjam
the box on the right is a r32 gtst/gts25de box (better than normal de box)

you can tell its the turbo box due to the amount of ribbing on the box (others dont have half as much) and the red hose on top

out of curiosity what is the red hose? :noob:

The easies way to tell the difference between an RB20 and RB25 gearboxes (assuming the 25 box is of a turbo origin) is pop your head under the the drivers side and have a look at your clutch slave cylinders.

RB20DE(T) & RB25DE

18.jpg

RB25DET

29.jpg

  • 4 weeks later...

The filler plug is on the passenger’s side of the box. From memory you will need 17 or a 19mm spanner. Unless you have an oil pump you will have to run a hose and funnel setup from under the bonnet to the hole. You'll need two people, one to hold the hose, the other to pure the oil in.

I hope that makes sense.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This sounds like a perfect excuse to install a Haltech R3.
    • I do believe from context he is talking about a S0/S1 R33 RB25 with associated ECU and Wiring for that, and a manual gearbox into a R34 N/A Auto. I don't have the knowledge of all the pinouts and such but my gut feeling from doing my own conversion is to use as much of the R33 stuff that you can. The "car" wiring is quite seperate from the "Engine" wiring when all things are considered. The only things to truly consider 99% of the time is the cluster, reverse lights and potentially disabling the 'not in P/N' immobilizer circuit.
    • A realistic expectattion of how long it has to last also comes down to.... when do you think you will be banned from registering and driving old petrol powered shitters? It's 27 years since that thing was built. It probably rusted out 15 years ago. It was probably repaired and looked OK for another 10. If you do a similarish bodge job now, or perhaps slightly better with some actual rust conversion and glassing, then.... get another 10-15 years out of it, after which you'll only be permitted by the CCP to drive electric cars manufactured in their Shenzen zone anyway. 
    • Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
×
×
  • Create New...