Jump to content
SAU Community

Recommended Posts

I have some basic mods.

RB25 turbo.

Walbro.

Nismo reg.

3 inch decat and all the way to rear.

Old azz AFC with dials!

An E-bay I/C thats tooo big.

I live in the US (only a few miles from yhat companies store in North Carolina).

My question is, for the money difference, would I be better off to order a 3" from out of the country, and hope it gets here, or would the 2.5 inch "E-bay knockoff" be OK? If its like a coulpe of HP less then I wanna get it, but if it is no better than what I have stock then no way.

Ps. I plan on getting a 3" up pipe at the same time of course.

Pss. How large is the factory piping?

Thanks yall.

i put one of these on last night. they factory dump has a 55mm pipe (even though the flange is bigger). these have a 65mm hole, which is a 40% bigger area. they aren't the best thing on the market but they are certainly better than stock. its hard to tell what sort of perfonce gain i got as it is raining here at the moment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...