Jump to content
SAU Community

Recommended Posts

hey guys got a question for yas.

if your car is stock height and you drive into a driveway and scrap the shit out of your front bar can you sue the council for the damage? or even if you arnt stock height but are still at the legal height of 100mm? :unsure:

Link to comment
https://www.sau.com.au/forums/topic/118571-got-a-question-for-yas/
Share on other sites

Why would you imagine the council would be liable for you driving your car in such a manner that it causes it to scrape against the driveway? If anything, they should sue you for damaging their driveway with your car...

Why would you imagine the council would be liable for you driving your car in such a manner that it causes it to scrape against the driveway? If anything, they should sue you for damaging their driveway with your car...

Yeah I totally agree. I don't think the council will pay for damage caused by an impact due to a drivewy lip being too high. In the same way they won't pay for damage to your car caused by an impact due to the posted speed limit being too high.

yeah, i dotn think ur gonna get much support on here, not to sound harsh, its just reality. where was the driveway anyway? is there any rule as to the angle on a driveway? coz it would make sense that any legal height car should be able to get up any driveway, within limits of course... not EVERY car and EVERY driveway, but i know alot of cars that scrape, and aint even that low

e.g. a stock skyline drivin through an intersection (not a driveway, but still...) at well below the speed limit scapes coz the road has a big mound in it, and on the dip on the other side, hits the groud with sum force. and this was on a main road crossing the princess highway

edit - i am aware the overhang is just as important as ride height, so i dont expect every car to get in every driveway, but most should be able too

Edited by VB-

From a legal point of view, the council are pretty well sewn-up. That's not to say that they're above the law, but you would need a tightly strung case to get them to concede anything.

I know a case that ran against a Metropolitan council a few years back. It ended up running for years, and racked up millions in legal fees. Eventually, the council lost the case, and was ordered to pay costs...

Needless to say, the residents of that council district STILL have a levy in their council rates to make up for the fees paid by the council for losing.

my parents built a house in a develpoment a couple of years ago, and for some f**king stupid reason there was a traffic island built right across the driveway. and the house was on the right side of the road and the end of the street was a dead end, so you either had to drive over the island or go to the end of the street and do a 10 point turn (due to lack of parking everyone parks ther cars in the street)

told the developers, they came and shortened the island, so now you can get in, but only just. easier to just drive on the wrong side of the road

  • 4 weeks later...

just checking gee wizz just a question! i know a girl who stepped in a pot hole on a foot path and broke her ankle and got 12 grand from the council for there poorly maintained foot path. but you cant get anything for damage to your car for a poorly maintained road?

And for those of you saying i should be sued for daqmage to their driveway and that i should learn how to drive, im not an idiot i mount it on an angle.

why is the legal height 100mm? is it to protect the roads, speed bumps and driveways? or is it to prevent damage to your car?

if vic roads build roads and streets and have a rule of 100mm and i stick to that rule and their road damages my car i should get compensated.

im not saying i will and i know ive got no hope getting it. but i thought fellow car enthusiasts would agree. makes sense to me.

obviously im careful not to damage my car but hey shit happens and when it does its because of crappy roads streets and driveways.

just checking gee wizz just a question! i know a girl who stepped in a pot hole on a foot path and broke her ankle and got 12 grand from the council for there poorly maintained foot path.

Thats a whole nuther kettle of fish.

The 100mm rule would be in effect, to prevent you from bottoming out over every dip and bump in the road. Bottoming out can be dangerous, as in extreme circumstances it could cause one or more tyres to lose contact with the road, hense the potential to lose control. 100mm would be the figure decided on, that would prevent you from bottoming out on anything other than the most extreme conditions.

By the way, I have seen plenty of stock cars scrape on some driveways.

Edited by Thunderbolt

Ok lets angle this question from another angle...as we all know to repair a cracked front bar is relatively cheap.

eg

John smith driving down the road in his r34 vspec II and hits a pot hole damaging one of 4000 dollar rims!

What do you think would be the outcome under these circumstances?

From a legal point of view, the council are pretty well sewn-up. That's not to say that they're above the law, but you would need a tightly strung case to get them to concede anything.

I know a case that ran against a Metropolitan council a few years back. It ended up running for years, and racked up millions in legal fees. Eventually, the council lost the case, and was ordered to pay costs...

Needless to say, the residents of that council district STILL have a levy in their council rates to make up for the fees paid by the council for losing.

This brings forward the question, is the counsil hated by its residents for continuing to persuse the case. Or is the resident that sued hated by all for the higher rates ;)

hey guys got a question for yas.

if your car is stock height and you drive into a driveway and scrap the shit out of your front bar can you sue the council for the damage? or even if you arnt stock height but are still at the legal height of 100mm? :P

Surely this thread is a joke.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...