Jump to content
SAU Community

Recommended Posts

hmm liz how bout a sr20 powered mx5 ? cool and quick :)

too expensive

if it's a track car, it needs to be cheap to set up and cheap to run and repair!

so s13 with s14 engine and s15 brakes.. i reckon it's a good combo

sic! ur a champ :thumbsup:

dont spose u know, what are trust t618z's rated to? are they 800hp like the gt-rs's?

no idea, for all my turbo needs I talk to slide

so your forcing your dreams onto me :thumbsup: you sound like a bad father. "you'll do it because i say so!" :)

the thing with the 20btt is that it has 224kw and 401nm of torque stock! also bear in mind that its making that torque from 2500rpm upto 5500rpm i believe. no sr could match that. now change the turbo's up the boost to around 15psi each and your going to have a very very quick car with almost no work involved at all! meanwhile the little sr20 is still trying to make the same power with the same mods.

too expensive

if it's a track car, it needs to be cheap to set up and cheap to run and repair!

so s13 with s14 engine and s15 brakes.. i reckon it's a good combo

no idea, for all my turbo needs I talk to slide

its going to be a hill climb car. s13 are too heavy for what i want. mx-5 is lighter and same price range

edit: troy, the coilovers i want for it are 3k for the set. tarmac rally spec ones from tein, have to be brought over from japan

Edited by lilmike86

yes but i remeber helping a mate do a 13b one and he had al sorts of problems in having to move the steering and cost him heaps.

nah its cool I thik i may of found a mx5 for sale they want 7k it has a new top and batt and is on the goldy :thumbsup: and its white :)

yes but i remeber helping a mate do a 13b one and he had al sorts of problems in having to move the steering and cost him heaps.

nah its cool I thik i may of found a mx5 for sale they want 7k it has a new top and batt and is on the goldy :) and its white :)

from what bullet told me there isnt a lot needed other than the mounts and driveline (i could be mistaken)

sounds good, but i have to restrain myself from looking for one just yet, not till insurance pay me. they could take months for all i know :) i want the car now, but i cant yet :thumbsup:

but you didn't answer my question who makes that kit?

you never asked me that question :thumbsup: the body kit - GARAGE VARY, engine mounts - Bullet racing, suspension - TEIN. didnt know which one you meant since you didnt really ask me?

lol, no... not towin any boats or anythin.

the washer between the plates was worn out or something.

dan replaced it a few wks back.

something went wrong last sunday taking off up a steep hill and started to make a really loud noise.

ended up being the spiggot bush which was replaced today.

also replaced some needle thing in the clutch to from what it orginally came with to a nismo one.

feels alot smoother with the gear changes now.

1200HP CLUTCH!!!

w00t

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...