Jump to content
SAU Community

Recommended Posts

you both have built rb25's and i bet they both go hard :thumbsup:

Yep fair enough.

Noel has done more to his, no doubt about it... I expect him to run no less than 350rwkw within weeks from now...

Im sure he will beat me to a low 11 quarter also, if not a 10 given the right rubber...

Im just happy there is another RB25 out there, rather than going the easy out and going for a 3 litre bottom end, Noel stayed true to the 25 and for that he gets my :D

Yep fair enough.

Noel has done more to his, no doubt about it... I expect him to run no less than 350rwkw within weeks from now...

Im sure he will beat me to a low 11 quarter also, if not a 10 given the right rubber...

Im just happy there is another RB25 out there, rather than going the easy out and going for a 3 litre bottom end, Noel stayed true to the 25 and for that he gets my :thumbsup:

*clears throat*

ha ha

Who wants to drive my car to a good drag time? I couldn't be bothered ha ha

What rims did you end up choosing to run your MT's with Noel?

Just i used R32 GTR rims and they dont fit, the guards need to be rolled.

These ones Col. My suspension is still stock height so maybe i will get away with it.

http://www.skylinesaustralia.com/forums/in...p;#entry3282633

noel...old man and me are going to keep the greddy mani on for now and then later do a straight manifold swap and do some back to back testing to see dyno and real world difference between greddy and plazmaman on a built motor....how does that sound for ya? We were arguing about it all afternoon....stupid old man, annoys the hell out of me sometimes. Just need some egt sensors in every port or lambda sensors for every port to monitor afrs for every cylinder. Hopefully we will cover most bases, not only will it help with tuning it will help log the results in terms of airflow for each cylinder and whatnot.

Completely random...but i rememeber that thread we were talking about whats better and whats proven and blah blah blah...so here is our chance to actually do that for everyone.

noel...old man and me are going to keep the greddy mani on for now and then later do a straight manifold swap and do some back to back testing to see dyno and real world difference between greddy and plazmaman on a built motor....how does that sound for ya? We were arguing about it all afternoon....stupid old man, annoys the hell out of me sometimes. Just need some egt sensors in every port or lambda sensors for every port to monitor afrs for every cylinder. Hopefully we will cover most bases, not only will it help with tuning it will help log the results in terms of airflow for each cylinder and whatnot.

Completely random...but i rememeber that thread we were talking about whats better and whats proven and blah blah blah...so here is our chance to actually do that for everyone.

Wow Mike!! Cant wait for that one bud.

Yes old men are stupid arent they, My old man never knew a damn thing till i had kids. (think about it)

Nice Noel, Nice...

Yeah stock height might give you enough, ill just let the body shop do their magic on the guards when fixing the other issue on mine...

Hope to have it back in time for the end of September finished and ready to run fast...

Im gonna head to Godzilla for a touch up on the pfc before i run again, heavy knock for me in the top end of the track, so Im thinking about fuel mix now also.

Doint research on toluene and methnol... But im starting from scratch and thinking out loud here, just need a way to increase octane so I can run a few extra degres of timing at the bank.

Help me run the lower numbers if I have a poor launch...

dude, you paused diehard to post!!!!!!!!!!!1

yes i did lol.. also got all the other new ones.. gonna watch bourne soonish.. right after i finish watching the toyo DA highlights// :thumbsup:

*clears throat*

ha ha

Who wants to drive my car to a good drag time? I couldn't be bothered ha ha

ill give it a shot andy.. :D

sif drive a gay mans 32. ppphhht. :) Nah f**kit. my mt radials should be here next week Andros, Lets strap them to your blue baby and make smoke :laugh::) :sorcerer:

that means going there but

Ill hire a driver HKS style, that way I get the time for interests sake but dont actually have to bother going there my self!

that means going there but

Ill hire a driver HKS style, that way I get the time for interests sake but dont actually have to bother going there my self!

Your man cans are growing bigger by the day. You'll be sitting down to piss next. :laugh:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...