Jump to content
SAU Community

Recommended Posts

thanks mate,the 89 model doesnt come with theide indicators, i dont like them anyway,

cheers mate

no worries. can't see from the pics, do you have the high mounted stop light in the rear window[ also required by compliancing regs]?. mine has one; I don't like it either!!.

well today

we got the polishing stuff back from Buff It....thanks MAX for picking it up for me and we worked till 11:30 at Keep Performance LAb.

got the diffuser back on, intergrated the Greddy Gracer rear mud flaps (no pic)

then putting the polished items on..

I know with everything polish, it will look VERY RICED out and makes me feel BROWN....as u know all the Brown ppl's civic has polished engine bays....but i had to make it polish because that's the only Colour the GOLD fittings would go along with...how i had the pink valve covers...it didn't do too well with the GOLD.

here are the pictures

1) engine bay VERSION ONE GOLD PINK PURPLE

R0011100.jpg

2) engine bay VERSION TWO POLISH GOLD

R0011166.jpg

R0011175.jpg

R0011168.jpg

R0011182.jpg

WE ARE GOING TO DTP !

DTP 2008

R0011242.jpg

R0011244.jpg

R0011265.jpg

R0011266.jpg

R0011270.jpg

R0011289.jpg

R0011280.jpg

R0011287.jpg

R0011283.jpg

R0011280.jpg

R0011279.jpg

R0011311.jpg

R0011303.jpg

R0011342.jpg

R0011339.jpg

R0011306.jpg

R0011261.jpg

R0011262.jpg

R0011233.jpg

R0011259.jpg

R0011260.jpg

R0011370.jpg

R0011371.jpg

R0011372.jpg

R0011373.jpg

I GOT BEST RHD SHOWOFF

MATT(YELLOW FD) GOT 2ND MAZDA SHOW OFF

MANY THANKS FOR TAKEDA ENTERPRISES FOR LETTING ME PUT MY CAR IN WITH THEM AS WELL AS KEEP PERFORMANCE LAB FOR BUILDING THE CAR !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...