Jump to content
SAU Community

Recommended Posts

are you planning on using bolt on guards, flares or hand flaring the guards to fit the rims?? with some stretched 245s or 255s you will come close but will still need something done... im keen to see it when your done if you are hand flaring it... thats gonna look awesome, nice wheel choice

took a couple shots this arvo and tonight, heres a few i mucked around with. Hard trying to get them looking nice without going too far :S, not sure if i did or not.

I included a few of the crappy night shots so i can get some advice :cheers:

so the night shots r shit, any tips ?? i'm pretty sure the blue spots are reflections from the HID's on the lense, hence how they can float in the sky haha.

I know i need to get a tri pod to start with for the darker shots, i didnt get a single one correctly in focus.

I also tried out my new flash tonight, nice wireless one. I tried it to the left of the car, directly infront of the car, behind the car, and at my feet, all set ups resulted in either a totally black pick (behind) a huge white spot and a shadow on the wall (to the left) an over exposed crappy look (in front) or something else, how can i correctly use this flash to better low light shots without shadows and over exposure ?. i should get a tripod for the flash too. I figure theyre generally better if you have 2 so they can correct each other ?

any tips much appreciated :D

post-22805-1226068188_thumb.jpg post-22805-1226068202_thumb.jpg post-22805-1226068215_thumb.jpg post-22805-1226068228_thumb.jpg post-22805-1226068239_thumb.jpg post-22805-1226068355_thumb.jpg

haha nice nice

How much power did you make with the RB25 turbo, heaps better to drive now?

I made 186.8kw @ 13psi. Yeah it is heaps better - Comes on a bit later than standard but makes up for it on top end as it holds 13psi and pulls till redline. It's good fun :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...