Jump to content
SAU Community

Recommended Posts

Hi guys and girls,

just thought id share a conversation i had with my dad the other day to hopefully save a few people out there some cash ($1,000).

My dad was (last weekend), washing his car on the street (in Glenelg) and he had a council worker shop on the oposite side of the road and approach him. He puklled out a book and started to write him a ticket. Dad was like, what the hell is going on?? And he gent started a massive speill about washing your car on the streets is now illegal and the only place that you are able to wash your car is on your own lawn on your property. The worker continued to say that the only water that can go down the drain is rain water!!

Dad got off with a warning but he said next time he'll be fined the 1K straight up.

Anyways, all the best and uuhhh yeah......don't wash your car on the street or you may be sorry!!

Regards Evan

Link to comment
https://www.sau.com.au/forums/topic/121041-washing-your-car-is-illegal/
Share on other sites

You know what would be a GREAT idea. Alllll that water that goes down the drain, that nice rain water. Why dont they keep that? Cant be that hard.

The problem we are having up here in S/E Qld isnt so much the lack of rain, there isnt much yeah, but its not falling in the catchment areas. So why not use all this drainage...

You know what would be a GREAT idea. Alllll that water that goes down the drain, that nice rain water. Why dont they keep that? Cant be that hard.

The problem we are having up here in S/E Qld isnt so much the lack of rain, there isnt much yeah, but its not falling in the catchment areas. So why not use all this drainage...

I'm going to assume it would be too expensive to treat the water that goes down storm water drains.

Imagin all the shit that goes down there with it. Poisons from lawns (round-up, zero), shit from cars, dodgy shit people pour down the drains etc.

Grey water recycling has been discussed a few times, but then people whinge about it soon as they hear that the water they may end up drinking is reused.. Even though by the time it gets to them it would have been so filtered so much it would just be like normal water.

Things are starting to get pretty rough in this country though with regards to lack of water, reducing greenhouse emissions, etc. It's only a good thing to get the issue out there before it's too late though.

Grey water recycling has been discussed a few times, but then people whinge about it soon as they hear that the water they may end up drinking is reused.. Even though by the time it gets to them it would have been so filtered so much it would just be like normal water.

Things are starting to get pretty rough in this country though with regards to lack of water, reducing greenhouse emissions, etc. It's only a good thing to get the issue out there before it's too late though.

The grey water is actually meant to be cleaner. Given the option of that over no water, I know what I would take all the time. Seems some people are going for the no water option. Desaltenation is just stupid, it costs far far too much.

Adding to that, back when we got our house (1990) we built it new, and moved up from jimboomba (no town water at all) so we knew the importance of saving water. We asked the counsil if we could have tank/s. They said NO its a mosquito hazzard... So stuff them.

Greenhouse is a funny one. There have been a few studies over the years. A car is better for the environment than public transport. (in terms of greenhouse gas that comes out of the exaust) its that simple. It wasnt a simple measure of car = x bus = y. It was z people in car, and q people in bus, / emmissions.

Funnily enough I've read a few stories here (in brisvegus) about pipes cracking all around the joint due to lack of lubrication (moisture) from water constantly flowing through them, due to people being so conservative with their water usage. The net effect being the money saved goes into repairing the pipes.

I whack $4 into one of those washing-bay machines, and hi-pressure soap my car, throw some of that low-pressure conditioner on, then high-pressure rinse (all for $4, maybe $5 - best time is late on Friday nights as you seem to get an extra minute for $4!).

Car is all clean, takes 6.30mins, perfect. If I do it by bucket at home, it costs more than $4 anyway (ie time taken = half hour, plus washnwax, etc).

meh. :) Damn Glenelg council, what a biatch

im about to use a high pressure water hose thingamajig with a trigger nozzle - apparently thats not illegal to wash ur car with....

That's true in Victoria, but not NSW.

You're only allowed to wash your car with reclaimed water in NSW, hence why all those Carlovers etc self-service car washes are doing so well.

i spend $3 at the carwash, rinse soap rinse. but then i take it home and take the time to polish and/or wax it. as washing it with the car wash strips the wax off it.

Anyway with the counsil worker, as he was walking away i woulda turned the hose on him :laugh: i woulda laughed :D

Edited by Freddy Kruger

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...