Jump to content
SAU Community

Recommended Posts

Just wanted to ask if i should drive my car around because i need some quotes from panel beaters.

The question that i wanted to ask is about that little fan in front of the radiator.

Mine isnt working... most likely due to the car accident.

Curious if i should be driving it without that working.

I left it on idle for about 1/2 hr to see how it goes and it was fine.

The rest of the car is fine just really some body damage but they are fixable.

Also can any panel beater be able to fix my car or are there some people that i have to go to?

Just wondering...

Thanks

Link to comment
https://www.sau.com.au/forums/topic/121889-should-i-drive-the-car/
Share on other sites

One little tip as I've learnt the hard way.

Attempt to avoid the pump shops.

Take the car to enthuaist crash shops/spray painters.

Look for nice cars in the parking lot not commodores/falcoons.

If there's no leaks and everything looks ok drive it and get quotes.

I'm assuming its under insurance?

yea i would like to take it to a smash repair place that has done imported cars before... just dont know where to take it to around Penrith, Sydney area.

Yea i wish it was under insurance... guess i learned my lesson

your car should be ok with the temps the way they are, however dont go for long trips of highway driving and try not to get stuck in traffic. if you are getting it fixed on insurance ask the insurance company who they use and get quotes from them, also look for a place that gives you a warrenty on their work

long trips on highway would keep the engine cooler then long trips in traffic. if you can keep the car above 50km/h as much as possible then it should not over heat in the cool temps we got atm.

Just make sure the temp gauge does not get anywhere near the top. Should be ok to drive unless its very hot and your driving in traffic for longer then 20 mins.

Edited by Guilt-Toy

The little fan in front of the radiator is only for the air con and when the water temp gets up to 95 degrees or so.

So driving it around on a winters day with the heater on rather than the aircon isn't going to cause problems.

Unless you have removed the factory viscous fan.......:)

  • 2 weeks later...

Yea just realised the little fan in front of the radiator must be the aircon fan... that shouldnt be a problem.

Also got a ridiculous quote from Emu Plains Smash Repairs.

They said that the body will cost me about under $6000. I think thats a pretty ripoff quote.

Here are the main things that got damaged from the accident. Besides this all ive got to worry about is that rear right wheel on a slight angle.

Do you think this will cost me $6000?

post-27024-1150800966.jpg

post-27024-1150801008.jpg

Yeah 6k sounds a bout right, theres alot of bits that need to be replaced; bumpers, guard, rear light, it all adds up. You did a good job on the quarter! even if it was pulled out or replaced either way thats the most expensive task.

Yeah $6k sounds reasonable. Don't forget they've gotta paint a fair amount too, but the rear quarters are a fair bit of work. Unfortunately not as simple as just bolting on a new panel. Still definately shop around though, but remember you get what you pay for. I've seen this is specifically the case when it comes to body repairs...

Yea just curious about my right rear back wheel.

Since its on a slight angle... just looking for a figure here.

How much is it to replace the whole suspension? If its even got anything to do with suspension?

If to repair the damages of that back wheel costs as close to $2000 then I might as well buy the whole suspension kit from Sydneykid

Call a wrecker and ask what a complete rear subframe is worth minus the diff or just replace what is bent. ;)

Sydneykids suspension kit is simply shocks and springs, bushes etc.

The reason your wheel will be bunged out is possibly a bent suspension arm of some sort.

Oh really... Guess my car wont be on the road for a while.

Looks like ive just gotta save at the moment.

A complete rear subframe... they dont come very cheap do they?

I'll try that out... I'll give a wrecker a ring.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...