Jump to content
SAU Community

Recommended Posts

All of this stuff must go..

R32 auto shifter leaver, etc - $10

R32 manual climate controls in gc - $10

R32 drivers window, has the usual guide scratches (suit cheap temporary replacement) - $10

R32 auto brake pedal - $10

R32 GTS-T accelerator cable in GC - $10

R32 GTS-t bonnet latch and support in trendy black - $10

R32 GTS-T stock fuel pump (pump only) - $20

R32 GTS-T clutch slave cylinder in GC (with temporary actuator pin.. suit replace for leaking one) - $20

R32 aircon box - $10

R32 Heater box and core - $50.. No leaks. Useful for spare.

R32 GTS-T LSD centre.. in good condition and bearings still in good nick. Just needs cleanup - $60

R33 rear springs and shocks (unsure of shock condition, springs look ok - FREE pickup only)

R32 factory seatbelts (japan) - $10

R32 GTS-T non type-m (5 stud) single pot calipers front + lines + rotors - $free

R31 engine loom (from a s3 manual), is minus afm plug - $20

R32 Steering rack - $50 Came from GTS4, not sure whether suits GTS-T or GTR, may well do. No signs of leaking or anything. Useful as a spare

R32 cross member and Urethane bush - $60.

Not really suit street use, as sends a lot of vibration through the chasis. It does however lock your gearbox down rock hard. Would suit dedicated drifter or track car. UAS is selling these mounts or very similar for $195 !

Updated 1/10/06 - Everything needs to go..

Parts are on the Gold Coast, QLD - The larger stuff is pickup only, rest may post.

post-1332-1150511091.jpg

post-1332-1150511113.jpg

post-1332-1150511260.jpg

post-1332-1150511493.jpg

post-1332-1150511502.jpg

post-1332-1150511510.jpg

post-1332-1150512029.jpg

post-1332-1150512058.jpg

post-1332-1150512137.jpg

post-1332-1150512151.jpg

post-1332-1150515525.jpg

post-1332-1159668641.jpg

post-1332-1159668826.jpg

post-1332-1159668849.jpg

post-1332-1159668940.jpg

Link to comment
https://www.sau.com.au/forums/topic/122417-misc-r32-parts/
Share on other sites

mate i'll take the radio suround let me know how much postage cost to nowra nsw 2540 please asap and your details how to pay pm or email me [email protected].

also u wouldnt have the rear c pillars would u? it covers the rear window to the rear? let me know

Link to comment
https://www.sau.com.au/forums/topic/122417-misc-r32-parts/#findComment-2266671
Share on other sites

  • 1 month later...
  • 3 weeks later...
  • 1 month later...

well the actual cylinder is fine.. I just rigged up a rod in there for a few weeks which seemed to work. Might do the trick. If you've got a stuffed one, just take out the old rod and use that.. Most of the new cylinders you buy don't have the rod included.

Updated... stuff must go in next 10 days!

Link to comment
https://www.sau.com.au/forums/topic/122417-misc-r32-parts/#findComment-2543275
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...