Jump to content
SAU Community

Recommended Posts

hi guys I'm Anthony and I'm based in the UK - I picked up my skyline R33gtst in January of this year after making a computer animation featuring two of my fave cars and then deciding I couldn't wait any longer hah!

The project was a 5month task I set myself to make a 1minute intro a bit like the need-for-speed-underground stuff. I modelled up two of my fave cars the R34 and the sierra cosworth RS500 which took about 6-8weeks each (first time car modelling in 3d), I then animated them racing round a cityscape and drifting on a long road and then composited the animation and made it look wet n rainy. I also did the sound although I pinched some from need for speed hehehe!

Now we all know the GTR would decimate the cossie (and whether it would or wouldn't we'll say it will cos we own skylines hehehehe ..not biased guv!) but see what you think - comments welcome....

quicktime movie 400x320pixels (about 25mb)

R34_vs_cosworth_final_animation

Link to comment
https://www.sau.com.au/forums/topic/122662-3d-animation-cosworth-vs-r34/
Share on other sites

So you are the creator? I have seen this on a number of UK forums and a couple of the main Ford ones there. Well done. As far as I remember from the postings on the forums no credit was given, just that "someone" had done them.

hi guys thanks for the comments - yeah I'm the creator of the animation hehe

thought I'd post it up here as I didn't know if it had been seen over there but apparently its done

the rounds worldwide it would seem hehe :laugh: god bless the internet

the animation was done using alias/autodesk maya and took about 5-6months total but that included modelling, animation, rendering and compositing. I got inspired off all the need for speed intros and thought i'd have a shot myself really as work wasn't really providing me any kind of challenge!

I could have done it quicker if working on it full time but i only had evenings and a coupla wkends to dedicate.

I reckon I could do it a heap load better too seeing as later versions of software have all these clever render layer tools and advanced

rendering tricks hehe!

it was a fun project to do tho and I would love to do another for a vid game or something :cool:

glad you all like tho :laugh:

Edited by anthonymcgrath

I aint got a copy in the office at present to upload I'm afraid but if anyone can download it and get a copy up on utube that'd be cool :happy:

savefile is a bit kooky from time to time - its very on and off but it does download :(

Out of interest what did you use to create the car.. did you get a someone to give you a laser print of the car (or whatever they do) or did you do it by hand??..

Looks amazing.. I've done some 3D Studio Max rendering and it's not the easiest to get such amazing detail on the cars

hi links

I did the animation using profile images - the kind you find on th side of airfix car model boxes hehe. These can be found on sites like www.suurland.com That and a heap of reference images from other sites like gtroc.co.uk and skylineowners.com :laugh: other than that they were manually modelled. I reckon I could have put more detail in (full interior etc...) but I'll save that for another project :O

  • 2 weeks later...
  • 2 weeks later...

Hey guys, for those who cant view it, im uploading it now to youtube with credits of course. Just do a search for ford cosworth gtr and it should find it ...

Cheers

ps. awesome animation. did you storyboard it at all or was it a put it together as you go thing? ...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...