Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just a question for anyone with an R33 GTR. Where did you guys get your Oxygen sensors from if you have replaced them, and how much did you pay for them??

I cant see the value in buying them from nissan for a total of $450. I just want some universal ones that i will adapt my old plugs to, but havent had any luck finding some over the last 2 weeks!

The specs are: 18mm thread, Titania Sensor, Three Wire, voltage range of 0 to 1 volts.

As you can see from the pic, my car is a 32 GTR, but i am running 33 dumps, which have the larger thread. So alternatively, if anyone knows where to get the bungs from to run the smaller 12mm thread 02 sensors from that would be great. (or even if you know of where to get them fabricated in Brisbane).

Thanks Guys, im beginning to get desperate!! :D

SLVR32GTR

Edited by SLVR32GTR
Link to comment
https://www.sau.com.au/forums/topic/123107-gtr-02-sensor-cheap-alternative/
Share on other sites

hey man, im in the same boat.

i asked this question a little while ago, but didnt get any answeres!

hopefully someone can help us!

steve

I know what you mean, i have been asking all of the reputable performance shops around Brisbane, also NGK and what not, and all i have recieved back is, "ahh sorry we dont have them or even know where to get them!"

Gets a tad annoying considering i need them in order to do my long awaited turbo conversion!

Surely someone on here has a 33 GTR and has changed there 02 sensors!

G'day blokes,

Changed my GTR 33 sensors 2 months ago. Cost me $339 for the pair from Nissan(genuine at trade price). I went through the long drawn out process of looking, phoning and eventually talking to technical specialists at most aftrmarket places for replacements. No luck, not made for direct fittment.

G'day blokes,

Changed my GTR 33 sensors 2 months ago. Cost me $339 for the pair from Nissan(genuine at trade price). I went through the long drawn out process of looking, phoning and eventually talking to technical specialists at most aftrmarket places for replacements. No luck, not made for direct fittment.

Hehe,

I thought that this would be the response. I suppose i am just suprised that nissan succeeded in making absolutely every part for a GTR the hardest and most expensive parts to come by! :D hehe

Ohh well, i suppose $339 isnt toooo bad.

Thanks mate.

Oh and for the record, i even went as far as contacting specialised dealers in NZ and the UK with still no luck!! Unbelievable.

If the GTR uses normal Zirconia type Oxygen Sensors (like the RB20/25), which im sure they would, then just buy a universal sensor with 18x1.5mm thread (standard O2 sensor thread) and you cut the connector and wire from the old sensor and crimp it onto the new universal sensor. (it will come with the crimp terminals and everything)

Universal sensors are around $40 - $80 at most.

You can't solder Oxygen sensor wiring as its stainless. (Thats why they supply crimp connectors with the sensor)

If the GTR uses normal Zirconia type Oxygen Sensors (like the RB20/25), which im sure they would, then just buy a universal sensor with 18x1.5mm thread (standard O2 sensor thread) and you cut the connector and wire from the old sensor and crimp it onto the new universal sensor. (it will come with the crimp terminals and everything)

Universal sensors are around $40 - $80 at most.

You can't solder Oxygen sensor wiring as its stainless. (Thats why they supply crimp connectors with the sensor)

Thats the problem though. GTR's (32 and 33 anyway) use titania sensors that are very hard to come accross. Basically 32 O2 sensors (12mm thread) can be bought through NGK, and nissan, but 33 (18mm thread) i have only found through nissan so far.

Talking to Sydneykid, he mentioned that a generic bosch lambda sensor should work for this application and only cost around $80. I have not researched this yet to verify though, so dont take it as gospel. These sensors are available through places like Repco.

Tony

VL Commodore and R31 use Titania 02 sensors that have the smaller thread size, have you looked into them at all?

Titaniam sensors are smaller due to their design. They are actually not a self generating sensor like the zirconum type, but a voltage reference sensor.

What this means is that instead of self generating a 0-1V output, it uses a resistor that changes resistance with the air/fuel ratio to give a 0-1V output. It uses the power from the heater 12v supply.

You can interchange them as them as they both give a 0-1V output. The only thing to note is that all Zirconia type sensors are the larger 18mm thread and Titania types are typically the smaller thread.

I have in the past, removed the bung from the exhaust manifold/dump pipe with the smaller thread for titania sensor and got a bung from like R33 dumps that have the 18mm bung and used the cheaper Zirconia type sensors on RB30 engines that originally used the Titania type sensor.

Do the GTR dumps have a large 24mm bung that is screwed into the dumps with the O2 sensor hole inside the bung? If so the bungs just unscrew.

  • 1 month later...
  • 1 year later...

Site sponsor Kudos does them HERE, but for a 32 GTR its still ~$325. FWIW R31/VL sensors are <$100.... I also need some, and i'll put them in when i install turbos and xforce dumps (which also come with reducers).

Does anyone know if all titania o2 sensors are electrically the same WRT sensor output? (and therefore theoretically adapable?)

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yes to both! Yes to standard ECU and tune, but exhaust is aftermarket. Unsure on brand. Actually have it sitting in at my desk haha! I have to set it up on my laptop but this is a great next step, will do. So I generally try to shift before 4.5K RPM most times. I largely don't do a lot of high-rev driving, but I will take it up to red 1-2x a week max, as I know the occasional "Italian tune-up" is good for these cars.  Oh wow, is this way better than what I'm getting. Does this mean there's a good chance I have an issue?   Thanks for all the info so far guys.
    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
×
×
  • Create New...