Jump to content
SAU Community

Recommended Posts

here's a couple of my stag at Pt Broughton new years day 2009. She towed the 1800kg van with ease 15.8L / 100km and 17.8/100 on the way home with a huge head wind.

Bloody Hell Dan! I hope you didn't encounter any speed bumps along the way.

That 1800kg's definitely puts a strain on your rear suspension.

Nice towball setup though :D

Who did the fabrication and install?

Bloody Hell Dan! I hope you didn't encounter any speed bumps along the way.

That 1800kg's definitely puts a strain on your rear suspension.

Nice towball setup though :blush:

Who did the fabrication and install?

I built the bar from a modified magna wagon setup, Was a pretty big job to get adequite fixings on the M35 chassis rails, wheel well & back panel. The entire setup has about 20 grade 8.8 bolts attaching it. This setup is not rated as such but from my background of electrical and structural engineering i know that the bar is not the weakest link. I am more woried anout the ally sub frame, where other have seen cracking.

The car needs some air bags for towing the van as it sits pretty low and hopefully I can get these installed before my next trip.

Overall it is a good tow car, Very happy with my stag :blink:

lmsonstagea-1.jpg

side skirts only sitting on hence the gap at the front, just a quick test fit of the rims from my other car and now i think they are staying for good :P 18x10+20 offsets with 235 tyres, they sit real nice actually, the rear needs to be lowered abit more before i post a pic of that.

Edited by unique1

Man that looks awesome.

Do you reckon you will get any rear rubbing with rims that wide? I am about to fit rims on my car and I would love to fit a set of fat alloys like that.

lmsonstagea-1.jpg

side skirts only sitting on hence the gap at the front, just a quick test fit of the rims from my other car and now i think they are staying for good :D 18x10+20 offsets with 235 tyres, they sit real nice actually, the rear needs to be lowered abit more before i post a pic of that.

the rear offset is pretty aggressive compared to fronts, i think it shall tuck the tyre in the gaurd but the rim will stick out, hence the reason for 235 tyres so they stretch abit, this is a pic of the rear but its not low at all so when lower it will tuck in abit more. I have the car on the brick trying to get it to lower down abit but it didnt do much. the front rim on in the pic is just a 33 gtr rim.

I wont be driving the car with these on for a while yet so cant comment on scrubing etc until i test them.

rearrims.jpg

Edited by unique1

^^^ you'll be right when you drop it a little, you'll gain some camber and she'll be apples - beware of inner clearance though as you'll be mighty close to the shock

here's my rears that sit the same as yours, just rear end slammed

100_0572.jpg

good to see another stag with mint wheel fitment

hey mate nice to see another good lookin yellow stag, I'm gettin some 18x8's on next week with an offset of +20 so ill chuck up some pics when they are on,

any chance of a side on pic of your car so i can see the mags better? what brand are they by the way?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
    • Yep four point harness. Mounted to a bolted in brace running behind the seats. Dont use it for daily driving tbh but good to have for when its needed plus it looks cool.
    • I had to double check the thread title r34 gtt offset advice lol. Thought maybe i posted on the wrong thread. 😂
×
×
  • Create New...