Jump to content
SAU Community

Recommended Posts

Thought I'd jump on board and post some photos, not that it doesn't look like every other factory Axis at this stage :)

Photo's are pre-import thanks to Iron Chef Imports.

Few modifications since then.

needs an exhaust thumbsup.gif

My wagon, currently on Work Emotions 11R's 18x9.5 +12 all round, also have a set of Gram Lights 57D's, Limited Time Attack edition, in 18x9.5 +22 all round.

Motor/gearbox is stock, other than the SAFC, and I'm running Koni adjustable shocks in the front, and Tein Wagon Masters in the rear. I'd love to post a photo or two more, but getting them off my phone and onto the pc at work is rather difficult. And yes, that is a NERF shotgun on the dash..

2012-03-27_183640.jpg

Nice. White wheels on a black car are a surprisingly good look. :thumbsup:

yeah i got the wheels preety cheap and when they where white was like :/ but they actually look preety good, was gonna get em sprayed orange but dont see that happening anymore

yeah i got the wheels preety cheap and when they where white was like :/ but they actually look preety good, was gonna get em sprayed orange but dont see that happening anymore

Cheap option when you get bored of them. Cheaper than buying new ones!

I dont think i threw up a pic of my beast in here, i did put one up somewhere else in the forums.

yep that def looks the part very very nice .. should go the part too i reckon . good job

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...